(1) Re-refiners and recyclers shall use only environmentally sound technologies while recycling and re-refining non-ferrous metal wastes or used oil or waste oil. 44[In case of used oil, re-refiners using acid clay process or modified acid clay process shall switch over on or before 31st December, 2004 to other environmentally sound technologies as under: ]
(a) Vacuum distillation with clay treatment;
(b) Vacuum distillation with hydrotreating;
(c) Thin film evaporation process; or
(d) Any other technology approved by the Ministry of Environment and Forests.
45[(2) The re-refiners and recyclers registered with the Ministry of Environment and Forests or the Central Pollution Control Board in accordance with the procedure laid down in Rule 19 shall file a compliance report of having adopted one of the technologies mentioned in sub-rule (1) on or before 31st December, 2004 to the Central Pollution Control Board.
Explanation. This shall be applicable only to re-refiners and re-cyclers subject to the conditions that the re-refiners and re-cyclers shall submit:
(i) copy of the order placed for purchase of plant and machinery for switchover to one of the approved technologies specified under sub-rule (1) of Rule 21 of these rules up to 15th August, 2004; and
(ii) bank guarantee, valid up to 31st January, 2005, for an amount of five lakh rupees in favour of Central Pollution Control Board, New Delhi up to 15th August, 2004.]
(3) Notwithstanding anything contained in a certificate of registration granted to a recycler or re-refiner, such registration with the Ministry of Environment and Forests shall cease to be valid if he fails to comply with sub-rule (1).
(4) The State Pollution Control Board or Committee shall inspect the re-refining and recycling units within three months of the expiry of the six months period referred to in sub-rule (1) and submit a compliance report to the Central Pollution Control Board which shall compile such information and furnish the same to the Ministry of Environment and Forests on a regular basis.
(5) The Ministry of Environment and Forests shall notify from time-to-time specifications and standards to be followed by recyclers and re-refiners.]
46 [SCHEDULE 1
[See Rule 3(14)(a)]
LIST OF HAZARDOUS WASTES
| Sl. No. |
Processes |
|
Hazardous Wastes |
| 1 |
2 |
|
3 |
| 1. |
Petrochemical processes and pyrolytic operations |
1.1 |
Furnace/reactor residue and debris* |
| |
|
1.2 |
Tarry residues |
| |
|
1.3 |
Oily sludge emulsion |
| |
|
1.4 |
Organic residues |
| |
|
1.5 |
Residues from alkali wash of fuels |
| |
|
1.6 |
Still bottoms from distillation process |
| |
|
1.7 |
Spent catalyst and molecular sieves |
| |
|
1.8 |
Slop oil from waste water |
| |
|
1.9 |
ETP sludge containing hazardous constituents |
| 2. |
Drilling operation for oil and gas production |
2.1 |
Drill cuttings containing oil |
| |
|
2.2 |
Sludge containing oil |
| |
|
2.3 |
Drilling mud and other drilling wastes* |
| 3. |
Cleaning, emptying and maintenance of petroleum oil storage tanks including ships |
3.1 |
Oil-containing cargo residue washing water and sludge |
| |
|
3.2 |
Chemical-containing cargo residue and sludge |
| |
|
3.3 |
Sludge and filters contaminated with oil |
| |
|
3.4 |
Ballast water containing oil from ships. |
| 4. |
Petroleum refining/re-refining of used oil/recycling of waste oil |
4.1 |
Oily sludge/emulsion |
| |
|
4.2 |
Spent catalyst |
| |
|
4.3 |
Slop oil |
| |
|
4.4 |
Organic residues from process |
| |
|
4.5 |
Chemical sludge from waste water treatment |
| |
|
4.6 |
Spent clay containing oil |
| 5. |
Industrial operations using mineral/synthetic oil as lubricant in hydraulic systems or other applications |
5.1 |
Used/spent oil |
| |
|
5.2 |
Wastes/residues containing oil |
| 6. |
Secondary production and/or use of zinc |
6.1 |
Sludge and filter press cake arising out of zinc sulphate production |
| |
|
6.2 |
Zinc fines/dust/ash/skimmings (dispersible form) |
| |
|
6.3 |
Other residues from processing of zinc ash/skimmings |
| |
|
6.4 |
Flue gas dust and other particulates* |
| 7. |
Primary production of zinc/lead/copper and other non-ferrous metals except aluminium |
7.1 |
Flue gas dust from roasting* |
| |
|
7.2 |
Process residues |
| |
|
7.3 |
Arsenic-bearing sludge |
| |
|
7.4 |
Metal-bearing sludge and residue including jarosite |
| |
|
7.5 |
Sludge from ETP and scrubbers |
| 8. |
Secondary production of copper |
8.1 |
Spent electrolytic solutions |
| |
|
8.2 |
Sludges and filter cakes |
| |
|
8.3 |
Flue gas dust and other particulates* |
| 9. |
Secondary production of lead |
9.1 |
Lead slag/Lead-bearing residues |
| |
|
9.2 |
Lead ash/particulate from flue gas |
| 10. |
Production and/or use of cadmium and arsenic and their compounds |
10.1 |
Residues containing cadmium and arsenic |
| 11. |
Production of primary and secondary aluminium |
11.1 |
Sludges from gas treatment |
| |
|
11.2 |
Cathode residues including pot lining wastes |
| |
|
11.3 |
Tar-containing wastes |
| |
|
11.4 |
Flue gas dust and other particulates* |
| |
|
11.5 |
Wastes from treatment of salt slags and black drosses* |
| 12. |
Metal surface treatment such as etching, staining, polishing, galvanising, cleaning, degreasing, plating, etc. |
12.1 |
Acid residues |
| |
|
12.2 |
Alkali residues |
| |
|
12.3 |
Spent bath/sludge containing sulphide, cyanide and toxic metals |
| |
|
12.4 |
Sludge from bath containing organic solvents |
| |
|
12.5 |
Phosphate sludge |
| |
|
12.6 |
Sludge from staining bath |
| |
|
12.7 |
Copper etching residues |
| |
|
12.8 |
Plating metal sludge |
| |
|
12.9 |
Chemical sludge from waste water treatment |
| 13. |
Production of iron and steel including other ferrous alloys (electric furnaces; steel rolling and finishing mills; coke oven and by-product plant) |
13.1 |
Process dust* |
| |
|
13.2 |
Sludge from acid recovery unit |
| |
|
13.3 |
Benzol acid sludge |
| |
|
13.4 |
Decanter tank tar sludge |
| |
|
13.5 |
Tar storage tank residue |
| 14. |
Hardening of steel |
14.1 |
Cyanide-, nitrate-, or nitrite-containing sludge |
| |
|
14.2 |
Spent hardening salt |
| 15. |
Production of asbestos or asbestos containing materials |
15.1 |
Asbestos-containing residues |
| |
|
15.2 |
Discarded asbestos |
| |
|
15.3 |
Dust/particulates from exhaust gas treatment. |
| 16. |
Production of caustic soda and chlorine |
16.1 |
Mercury-bearing sludge |
| |
|
16.2 |
Residue/sludges and filter cakes* |
| |
|
16.3 |
Brine sludge containing mercury |
| 17. |
Production of acids |
17.1 |
Residues, dusts or filter cakes* |
| |
|
17.2 |
Spent catalyst* |
| 18. |
Production of nitrogenous and complex fertilizers |
18.1 |
Spent catalyst* |
| |
|
18.2 |
Spent carbon* |
| |
|
18.3 |
Sludge/residue containing arsenic |
| |
|
18.4 |
Chromium sludge from water cooling tower |
| |
|
18.5 |
Chemical sludge from waste water treatment |
| 19. |
Production of phenol |
19.1 |
Residue/sludge containing phenol |
| 20. |
Production and/or industrial use of solvents |
20.1 |
Contaminated aromatic, aliphatic or napthenic solvents not fit for originally intended use |
| |
|
20.2 |
Spent solvents |
| |
|
20.3 |
Distillation residues |
| 21. |
Production and/or industrial use of paints, pigments, lacquers, varnishes, plastics and inks |
21.1 |
Wastes and residues |
| |
|
21.2 |
Fillers residues |
| 22. |
Production of plastic raw materials |
22.1 |
Residues of additives used in plastics manufacture like dyestuffs, stabilizers, flame retardants, etc. |
| |
|
22.2 |
Residues of platicisers |
| |
|
22.3 |
Residues from vinylchloride monomer production |
| |
|
22.4 |
Residues from acrylonitrile production |
| |
|
22.5 |
Non-polymerised residues |
| 23. |
Production and/or industrial use of glues, cements, adhesive and resins |
23.1 |
Wastes/residues (not made with vegetable or animal materials)* |
| 24. |
Production of canvas and textiles |
24.1 |
Textile chemical residues* |
| |
|
24.2 |
Chemical sludge from waste water treatment |
| 25. |
Industrial production and formulation of wood preservatives |
25.1 |
Chemical residues |
| |
|
25.2 |
Residues from wood alkali bath |
| 26. |
Production or industrial use of synthetic dyes, dye-intermediates and pigments |
26.1 |
Process waste sludge/residues containing acid or other toxic metals or organic complexes |
| |
|
26.2 |
Chemical sludge from waste water treatment |
| |
|
26.3 |
Dust from air filtration system |
| 27. |
Production or industrial use materials made with organo-silicone compounds |
27.1 |
Silicone-containing residues |
| |
|
27.2 |
Silicone oil residues |
| 28. |
Production/formulation of drugs/pharmaceuticals |
28.1 |
Residues and wastes* |
| |
|
28.2 |
Spent catalyst/spent carbon |
| |
|
28.3 |
Off-specification products |
| |
|
28.4 |
Date-expired, discarded and off-specification drugs/medicines |
| |
|
28.5 |
Spent mother liquor |
| |
|
28.6 |
Spent organic solvents |
| 29. |
Production, use and formulation of pesticides including stock-piles |
29.1 |
Wastes/residues containing pesticides |
| |
|
29.2 |
Chemical sludge from waste water treatment |
| |
|
29.3 |
Date-expired and off-specification pesticides |
| 30. |
Leather tanneries |
30.1 |
Chromium-bearing residue and sludge |
| |
|
30.2 |
Chemical sludge from waste water treatment |
| 31. |
Electronic Industry |
31.1 |
Residues and wastes* |
| |
|
31.2 |
Spent etching chemicals and solvents |
| 32. |
Pulp & Paper Industry |
32.1 |
Spent chemicals |
| |
|
32.2 |
Corrosive wastes arising from use of strong acid and bases |
| |
|
32.3 |
Sludge containing absorbable organic halides |
| 33. |
Disposal of barrels/containers used for handling of hazardous wastes/chemicals |
33.1 |
Chemical containing residue from decontamination and disposal |
| |
|
33.2 |
Sludge from treatment of waste water arising out of cleaning/disposal of barrels/containers |
| |
|
33.3 |
Discarded containers/barrels/liners used for hazardous wastes/chemicals |
| 34. |
Purification processes for air and water |
34.1 |
Flue gas cleaning residue* |
| |
|
34.2 |
Toxic metal containing residue from used-ion exchange material in water purification |
| |
|
34.3 |
Chemical sludge from waste water treatment |
| |
|
34.4 |
Chemical sludge, oil and grease skimming residues from common industrial effluent treatment plants (CETPs) and industry-specific effluent treatment plants (ETPs) |
| |
|
34.5 |
Chromium sludge from cooling water treatment |
| 35. |
Purification process for organic compounds/solvents |
35.1 |
Filters and filter material which have organic liquids in them, e.g. mineral oil, synthetic oil and organic chlorine compounds |
| |
|
35.2 |
Spent catalyst* |
| |
|
35.3 |
Spent carbon* |
| 36. |
Waste treatment processes, e.g. incineration, distillation, separation and concentration techniques |
36.1 |
Sludge from wet scrubbers |
| |
|
36.2 |
Ash from incineration of hazardous waste, flue gas cleaning residues |
| |
|
36.3 |
Spent acid from batteries |
| |
|
36.4 |
Distillation residues from contaminated organic solvents |
* Unless proved otherwise by the occupier based on sampling and analysis carried out by a laboratory recognised under the Act not to contain any of the constituents mentioned in Schedule 2 to the extent of concentration limits specified therein.
SCHEDULE 2
[See Rule 3(14)(b)]
LIST OF WASTES CONSTITUENTS WITH CONCENTRATION LIMITS47
Class A
Concentration limit: > 50 mg/kg
| A1 |
Antimony and antimony compounds |
| A2 |
Arsenic and arsenic compounds |
| A3 |
Beryllium and beryllium compounds |
| A4 |
Cadmium and cadmium compounds |
| A5 |
Chromium (VI) compounds |
| A6 |
Mercury and mercury compounds |
| A7 |
Selenium and selenium compounds |
| A8 |
Tellurium and tellurium compounds |
| A9 |
Thallium and thallium compounds |
| A10 |
Inorganic cyanide compounds |
| A11 |
Metal carbonyls |
| A12 |
Napthalene |
| A13 |
Anthracene |
| A14 |
Phenanthrene |
| A15 |
Chrysene, benzo (a) anthracene, fluoranthene, benzo (a) pyrene, benzo (K) fluoranthene, indeno (1, 2, 3-cd) pyrene and benzo (ghi) perylene |
| A16 |
Halogenated compounds of aromatic rings, e.g. polychlorinated biphenyls, polychloroterphenyls and their derivatives |
| A17 |
Halogenated aromatic compounds |
| A18 |
Benzene |
| A19 |
Organo-chlorine pesticides |
| A20 |
Organo-tin Compounds |
Class B
Concentration limit: > 5000 mg/kg
| B1 |
Chromium (III) compounds |
| B2 |
Cobalt compounds |
| B3 |
Copper compounds |
| B4 |
Lead and lead compounds |
| B5 |
Molybdenum compounds |
| B6 |
Nickel compounds |
| B7 |
Inorganic Tin compounds |
| B8 |
Vanadium compounds |
| B9 |
Tungsten compounds |
| B10 |
Silver compounds |
| B11 |
Halogenated aliphatic compounds |
| B12 |
Organo phosphorus compounds |
| B13 |
Organic peroxides |
| B14 |
Organic nitro-and nitroso-compounds |
| B15 |
Organic azo and azo-oxy compounds |
| B16 |
Nitriles |
| B17 |
Amines |
| B18 |
(Iso-and thio-) cyanates |
| B19 |
Phenol and phenolic compounds |
| B20 |
Mercaptans |
| B21 |
Asbestos |
| B22 |
Halogen-silanes |
| B23 |
Hydrazine(s) |
| B24 |
Fluorine |
| B25 |
Chlorine |
| B26 |
Bromine |
| B27 |
White and red phosphorus |
| B28 |
Ferro-silicate and alloys |
| B29 |
Manganese-silicate |
| B30 |
Halogen-containing substances which produce acidic vapours on contact with humid air or water, e.g. silicon tetrachloride, aluminum chloride, titanium tetrachloride |
Class C
Concentration limit: > 20,000 mg/kg
| C1 |
Ammonia and ammonium compounds |
| C2 |
Inorganic peroxides |
| C3 |
Barium compounds, except barium sulphate |
| C4 |
Fluorine compounds |
| C5 |
Phosphorus compounds except phosphates of aluminum, calcium and iron |
| C6 |
Bromates, (hypo-bromites) |
| C7 |
Chlorates, (hypo-chlorites) |
| C8 |
Aromatic compounds other than those listed under A12 to A18 |
| C9 |
Organic silicon compounds |
| C10 |
Organic sulphur compounds |
| C11 |
lodates |
| C12 |
Nitrates, nitrites |
| C13 |
Sulphides |
| C14 |
Zinc compounds |
| C15 |
Salts of per-acids |
| C16 |
Acid amides |
| C17 |
Acid anhydrides |
Class D
Concentration limit: > 50,000 mg/kg
| D1 |
Total Sulphur |
| D2 |
Inorganic acids |
| D3 |
Metal hydrogen sulphates |
| D4 |
Oxides and hydroxides except those of hydrogen, carbon, silicon, iron, aluminum, titanium, manganese, magnesium, calcium |
| D5 |
Total hydrocarbons other than those listed under A12 to A18 |
| D6 |
Organic oxygen compounds |
| D7 |
Organic nitrogen compounds expressed as nitrogen |
| D8 |
Nitrides |
| D9 |
Hydrides |
Class E
Regardless of concentration limit; Classified as hazardous wastes at all concentrations
| E1 |
Flammable substances |
| E2 |
Substances which generate hazardous quantities of flammable gases on contact with water or damp air. |
SCHEDULE 3
[See Rule 3(14)(c) & 12(a)]
PART A: LISTS OF WASTES APPLICABLE ONLY FOR IMPORTS AND EXPORTS
LIST A48
| Basel No. |
Description of Wastes |
Annex I49 |
Annex III50 |
OECD No. |
Customs code |
| A1 |
Metal and Metal-bearing wastes |
|
|
|
|
| A1010 |
Metal waste and waste consisting of alloys of the following metals, but excluding such wastes specified in List B (corresponding mirror entry under List B in brackets) |
|
|
|
|
| |
Antimony |
Y27 |
6.1, 11, 12 |
AA070 |
ex 2620.90 |
| |
Cadmium |
Y26 |
6.1, 11, 12 |
AA070 |
ex 2620.90 |
| |
Tellurium |
Y28 |
6.1, 11, 12 |
AA070 |
ex 2620.90 |
| |
Lead |
Y31 |
6.1, 11, 12 |
|
|
| A1020 |
Waste having as constituents or contaminants, excluding metal wastes in massive form, any of the following: |
|
|
|
|
| |
Cadmium, cadmium compounds (See B1020) |
Y26 |
6.1, 11, 12 |
AA070 |
ex 2620.90 |
| |
Antimony, antimony compounds(See B1020) |
Y27 |
|
|
|
| |
Tellurium, tellurium compounds (See B1020) |
Y28 |
6.1, 11, 12 |
AA070 |
ex 2620.90 |
| |
Lead, Lead compounds (See B1020) |
Y31 |
6.1, 11, 12 |
AA030 |
ex 2620.20 |
| A1040 |
Waste having as constituents any of the following: |
|
|
|
|
| |
Metal carbonyls |
Y19 |
6.1, 11, 12 |
|
|
| A1050 |
Galvanic sludges |
Y17 |
6.1, 12 |
AA120 |
|
| A1060 |
Waste Liquors from the pickling of metals |
Y17 |
6.1, 12 |
AA130 |
|
| A1070 |
Leaching residues from zinc processing, dusts and sludges such as jarosite, hematite, geoethite, etc. |
Y23 |
12 |
AA140 |
|
| A1080 |
Waste Zinc residues not included in List B containing lead and cadmium in concentrations sufficient to exhibit hazard characteristics indicated in Part B of this Schedule (See B1080 and B1100) |
Y23 |
4.3, 12 |
AA020 |
ex 2620.19 ex 2620.1 ex 2817 |
| A1090 |
Ashes from the incineration of insulated copper wire |
Y22 |
12 |
|
|
| A1100 |
Dust and residues from gas |
Y18, |
12 |
|
ex 2620.30 |
| |
cleaning systems of copper smelters |
Y22 |
|
|
|
| A1110 |
Spent electrolytic solutions from copper electro-refining and electro-winning operations |
Y22 |
12 |
|
ex 2620.30 |
| A1120 |
Wastes sludges, excluding |
Y18, |
12 |
|
ex 2620.30 |
| |
anode slimes, from electrolytic purification systems in copper electro-refining and electro-winning operations |
Y22 |
|
|
|
| A1130 |
Spent etching solutions containing dissolved copper |
Y22 |
12 |
|
ex 3824.90 |
| A1150 |
Precious metal ash from incineration of printed circuit boards not included in List B (See B1160) |
|
|
AA161 |
ex 7112.10 |
| A1160 |
Waste Lead acid batteries, whole or crushed |
Y31 |
6.1, 11, 12 |
AA170 |
|
| A1170 |
Unsorted waste batteries |
Y26, |
6.1, 11, 12 |
|
ex 8548.10 |
| |
excluding mixtures of only |
Y29, |
|
|
ex 8548.90 |
| |
List B batteries. Waste batteries not specified in List B containing Schedule 2 constituents to an extent to render them hazardous (See B1090) |
Y31 |
|
|
|
| A1180 |
Waste Electrical and electronic assemblies or scrap containing, compounds such as accumulators and other batteries included in List A, mercury-switches, glass from cathode-ray tubes and other activated glass and PCB-capacitors, or contaminated with Schedule 2 constituents (e.g. cadmium, mercury, lead, polychlorinated biphenyl) to an extent that they exhibit hazard characteristics indicated in Part-B of this Schedule (See B1110) |
|
|
|
|
| A2 |
Wastes containing principally inorganic constituents, which may contain metals and organic materials |
|
|
|
|
| A2010 |
Glass waste from cathode ray tubes and other activated glasses |
Y31 |
6.1, 11, 12 |
AB040 |
ex 7001.00 |
| A2030 |
Wastes catalysts but excluding such wastes specified in List B |
Y31 |
|
|
|
| A3 |
Wastes containing principally organic constituents which may contain metals and inorganic materials |
|
|
|
|
| A3010 |
Waste from the production or processing of petroleum coke and bitumen |
Y11 |
|
AC010 |
ex 2713.90 |
| A3020 |
Waste mineral oils unfit for their originally intended use |
Y8 |
|
AC030 |
2710.00 |
| |
|
|
|
|
3823.90 |
| A3050 |
Wastes from production, formulation and use of resins, latex, plasticisers, glues/adhesives, excluding such wastes specified in List B (B4020) |
Y13 |
|
AC090 |
|
| A3070 |
Waste Phenol, phenol compounds including chlorophenol in the form of liquids or sludges |
Y39 |
|
AC110 |
|
| A3080 |
Waste ethers not including those specified in List B |
|
|
AC130 |
|
| A3120 |
Fluff: light fraction from shredding |
|
|
AC190 |
|
| A3130 |
Waste organic phosphorous compounds |
Y37 |
|
AC200 |
|
| A3140 |
Waste non-halogenated organic solvents (but excluding such wastes specified in List B) |
Y42 |
|
AC 210 |
|
| A3160 |
Waste halogenated or unhalogenated non-aqueous distillation residues arising from organic solvent recovery operations |
Y18 |
|
AC230 |
|
| A3170 |
Wastes arising from the production of aliphatic halogenated hydrocarbons (such as chloromethanes, dichloroethane, vinylchloride, vinylidene chloride, allyl chloride and epichlorhydrin) |
Y45 |
|
AC240 |
|
| A4 |
Wastes which may contain either inorganic or organic constituents |
|
|
|
|
| A4010 |
Wastes from the production and, preparation, and use of pharmaceutical products but excluding such wastes specified in List B |
Y2 |
|
ADVISE R010 |
|
| A4040 |
Wastes from the manufacture |
Y5, |
|
ADVISE |
|
| |
formulation and use of wood |
Y22, |
|
R030 |
|
| |
preserving chemicals |
Y24 |
|
|
|
| A4070 |
Wastes from the production, |
Y12 |
|
ADVISE |
|
| |
formulation and use of inks, dyes, pigments, paints, lacquers, varnish excluding those specified in List B (B4010) |
|
|
R070 |
|
| A4080 |
Wastes of an explosive nature excluding such wastes specified in List B |
Y15 |
|
|
|
| A4090 |
Waste acidic or basic solutions |
Y34, |
|
AB110 |
|
| |
excluding those specified in List B (B2120) |
Y35 |
|
ADVISE |
|
| A4100 |
Wastes from industrial pollution control devices for cleaning of industrial off-gases excluding such wastes specified in List B |
Y18 |
|
R110 |
|
| A4110 |
Wastes that contain, consist of or are contaminated with any of the following: Any congenor of polychlori nated dibenzofuran Any congenor of polychlorinated dibenzodioxin |
Y43 |
|
RC010 |
|
| A4120 |
Wastes that contain, consist of or are contaminated with peroxides |
|
|
|
|
| A4130 |
Waste packages and containers containing any of the constituents mentioned in Schedule 2 to the extent of concentration limits specified therein. |
|
|
|
|
| A4140 |
Waste consisting of or containing off specification or outdated chemicals containing any of the constituents mentioned in Schedule 2 to the extent of concentration limits specified therein. |
|
|
|
|
| A4150 |
Waste chemical substances arising from research and development or teaching activities which are not identified and/or are new and whose effects on human health and/or the environment are not known |
Y14 |
|
|
|
| A4160 |
Spent activated carbon not included in List B (B2060). |
|
|
|
ex 2803 |
| LIST B* |
| B1 |
Metal and metal-bearing wastes |
|
|
|
|
| B1010 |
Metal and metal-alloy wastes in metallic, non-dispersible form: |
|
|
|
|
| |
Precious metals (gold, sliver, platinum)** |
|
|
|
|
| |
Iron and steel scrap** |
|
|
|
|
| |
Nickel scrap**** |
|
|
GA130 |
750300 |
| |
Aluminum scrap**** |
|
|
|
|
| |
Zinc scrap**** |
|
|
|
|
| |
Tin scrap**** |
|
|
|
|
| |
Tungsten scrap** |
|
|
|
|
| |
Molybdenum scrap*** |
|
|
GA190 |
ex 810291 |
| |
Tantalum scrap*** |
|
|
GA200 |
ex 810310 |
| |
Cobalt scrap*** |
|
|
GA220 |
ex 810510 |
| |
Bismuth scrap*** |
|
|
GA230 |
ex 810600 |
| |
Titanium scrap*** |
|
|
GA250 |
ex 810810 |
| |
Zirconium scrap*** |
|
|
GA260 |
ex 810910 |
| |
Manganese scrap*** |
|
|
GA280 |
ex 811100 |
| |
Germanium scrap*** |
|
|
GA310 |
ex 811230 |
| |
Vanadium scrap*** |
|
|
GA320 |
ex 811240 |
| |
Hafnium scrap*** |
|
|
GA330 |
ex 8112.91 |
| |
Indium scrap*** |
|
|
GA340 |
ex 8112.91 |
| |
Niobium scrap*** |
|
|
GA350 |
ex 8112.91 |
| |
Rhenium scrap*** |
|
|
GA360 |
ex 8112.91 |
| |
Gallium scrap*** |
|
|
GA370 |
ex 8112.91 |
| |
Magnesium scrap**** |
|
|
GA210 |
810420 |
| |
Copper scrap*** |
|
|
GA120 |
740400 |
| |
Thorium scrap |
|
|
|
|
| |
Rare earths scrap |
|
|
|
|
| * List B given as Annex. IX of the Basel Convention on Transboundary Movement of Hazardous Wastes and their Disposal comprises of wastes not covered by Article 1, Paragraph 1(a) of the Convention, unless they contain material listed under Annexure 1 of the Convention to an extent causing them to exhibit Annexure III characteristics. Status of wastes in the above list with regard to their import in the country is indicated in respective footnotes. (for details, refer to ITC-HS Classification (EXIM Policy) brought out by the Directorate-General of Foreign Trade, Ministry of Commerce). Other residual and waste products of chemical and allied industries appearing in the above list but not specified in the EXIM Policy are restricted and cannot be allowed to be imported into the country without DGFT licence. |
| ** Import permitted in the country without any licence or restriction. |
| *** Restricted, import permitted in the country with DGFT licence only for the purpose of re-processing or reuse. |
| **** Import of material covered by ISRI code is permitted without licence; for other material, DGFT licence is necessary. |
| ***** Import of copper scrap, namely copper wire covered under ISRI code Druid and Jelly- filled copper cables is permitted without a licence to units registered with the Ministry of Environment & Forests. |
| B1020 |
Clean, uncontaminated metal scrap, including alloys, in bulk finished form (sheet, place, beams, rods, etc.), of: |
|
|
|
|
| |
Antimony scrap* |
|
|
GA270 |
ex 8110.00 |
| |
Cadmium scrap* |
|
|
GA240 |
ex 8107.10 |
| |
Lead scrap** |
|
|
|
|
| |
Tellurium scrap*** |
|
|
|
|
| B1030 |
Refractory metals containing residues |
|
|
|
|
| B1040 |
Scrap assemblies from electrical power generation not contaminated with lubricating oil, PCB or PCT to an extent to render them hazardous |
|
|
|
|
| B1050 |
Mixed non-ferrous metal, heavy fraction scrap, not containing any of the constituents mentioned in Schedule 2 to the extent of concentration limits specified therein |
|
|
|
|
| B1060 |
Waste tellurium in metallic elemental form including powder |
|
|
|
|
| * Restricted, import permitted in the country with DGFT licence only for the purpose of reprocessing or reuse. |
| ** Restricted, import of the following material covered under Battery scrap is permitted in the country with DGFT licence: Battery scrap, namely the following: Lead battery plates covered by ISRI, Code word Rails Battery lugs covered by ISRI, Code word Rakes. Battery wastes, namely the following: Scrap drained/dry while intact, lead batteries covered by ISRI, Code word Rains, Scrap wet whole intact lead batteries covered by ISRI, Code word Rink, Scrap industrial intact lead cells covered by ISRI Code word Rono, Scrap whole intact industrial lead batteries covered by ISRI, Code word Roper, Edison batteries covered by ISRI, Code word Vaunt. Other waste and scrap. |
| *** Import permitted in the country without any licence or restriction. |
| B1070 |
Waste of copper and copper alloys in dispersible form, unless they contain any of the constituents mentioned in Schedule 2 to the extent of concentration limits specified therein* |
|
|
|
ex 2620.30 |
| B1080 |
Zinc ash and residues |
|
|
|
ex 2620.10 |
| |
including zinc alloys residues |
|
|
|
ex 2620.19 |
| |
in dispersible form unless they contain any of the constituents mentioned in Schedule 2 to the extent of concentration limits specified therein** |
|
|
|
ex 2817.00 |
| B1090 |
Waste batteries conforming to |
|
|
|
ex 8548.10 |
| |
specification, excluding those made with lead, cadmium or mercury |
|
|
|
ex 8548.90 |
| B1100 |
Metal-bearing wastes arising from melting, smelting and refining of metals: |
|
|
GB |
|
| |
**Hard Zinc Spelter |
|
|
|
|
| |
**Zinc-containing drosses: Galvanizing slab zinc top dross: |
|
|
|
|
| |
(>90% Zn) |
|
|
|
|
| |
Galvanizing slab Zinc bottom dross (<92% Zn) |
|
|
|
|
| |
Zinc die casting dross (>85% Zn) |
|
|
|
|
| |
Hot dip glavanizes slab zinc dross (batch) (>92% Zn) |
|
|
|
|
| |
Zinc skimmings |
|
|
|
|
| * Copper dross containing copper greater than 65% and lead and cadmium equal to or less than 1.25% and 0.1% respectively; spent cleaned metal catalyst containing copper, and Copper reverts, cake and residues containing lead and cadmium equal to or less than 1.25% and 0.1% respectively are allowed for import without DGFT licence to units (actual users) registered with MoEF upto an annual quantity limit indicated in the Registration letter. Copper reverts, cake and residues containing lead and cadmium greater than 1.25% and 0.1% respectively are under restricted category for which import is permitted only against DGFT licence for the purpose of processing or reuse by units registered with MoEF (actual users). |
| ** Zinc ash/skimmings in dispersible form containing zinc more than 65% and lead and cadmium equal to or less than 1.25% and 0.1% respectively and spent cleaned metal catalyst containing zinc are allowed for import without DGFT licence to units registered with MoEF (actual users) upto an annual quantity limit indicated in Registration Letter. Zinc ash and skimmings containing less than 65% zinc and lead and cadmium equal to or more than 1.25% and 0.1% respectively and hard zinc spelter and brass dross containing lead greater than 1.25% are under restricted category for which import is permitted against DGFT licence and only for purpose of processing or reuse by units registered with MoEF (actual users). |
| |
Slags from copper processing for further processing or refining containing arsenic, lead or cadmium unless they contain any of the constituents mentioned in Schedule 2 to the extent of concentration limits specified therein. |
|
|
|
ex 2620.30 |
| |
Slags from precious metals processing for further refining |
|
|
GB40 |
ex 2620.90 |
| |
Wastes of refractory linings, including crucibles, originating from copper smelting |
|
|
|
|
| |
Aluminium skimmings (or skims) excluding salt slag |
|
|
AA50 |
|
| |
Tantalum-bearing tin slags greater than 0.5% tin |
|
|
GB050 |
ex 2620.90 |
| B1110 |
Electrical and electronic assemblies: |
|
|
GC |
|
| |
Electronic assemblies consisting only of metals or alloys |
|
|
GC010 |
|
| |
Waste Electrical and electronic assemblies scrap (including printed circuit boards, electronic components and wires) destined for direct reuse and not for recycling or final disposal |
|
|
GC020 |
|
| |
Waste electrical and electronic assemblies scrap (including printed circuit boards) not containing components such as accumulators and other batteries included in List A, mercury-switches, glass from cathode-ray tubes and other activated glass and PCB-capacitors, or not contaminated with constituents such as cadmium, mercury, lead, polychlorinated biphenyl or from which these have been removed, to an extent that they do not possess any of the constituents mentioned in Schedule 2 to the extent of concentration limits specified therein |
|
|
|
|
| |
Electrical and electronic assembies (including printed circuit boards, electronic components and wires) destined for direct reuse and not for recycling or final disposal. |
|
|
|
|
| B1120 |
Spent catalysts excluding liquids used as catalysts, containing any of: |
|
|
|
|
| |
Transition metals, excluding waste catalysts (spent catalysts, liquid used catalysts or other catalysts) on List A: |
|
|
|
|
| |
Scandium |
Titanium |
|
|
|
|
| |
Vanadium |
Chromium |
|
|
|
|
| |
Manganese |
Iron |
|
|
|
|
| |
Cobalt |
Nickel |
|
|
|
|
| |
Copper |
Zinc |
|
|
|
|
| |
Yttrium |
Zirconium |
|
|
|
|
| |
Niobium |
Molybdenum |
|
|
|
|
| |
Hafnium |
Tantalum |
|
|
|
|
| |
Tungsten |
Rhenium |
|
|
|
|
| |
Lanthanaides |
(rare earth metals): |
|
|
|
|
| |
Lanthanum |
Cerium |
|
|
|
|
| |
Praseodymium |
Neody |
|
|
|
|
| |
Samarium |
Europium |
|
|
|
|
| |
Gadolinium |
Terbium |
|
|
|
|
| |
Dysprosium |
Holmium |
|
|
|
|
| |
Erbium |
Thulium |
|
|
|
|
| |
Ytterbium |
Lutetium |
|
|
|
|
| B1130 |
Cleaned spent precious metal- |
|
|
|
ex 381510 |
| |
bearing catalysts |
|
|
|
ex 711510 |
| B1140 |
Precious metal-bearing |
|
|
|
ex 381510 |
| |
residues in solid form which contain traces of inorganic cyanides |
|
|
|
ex 711510 |
| B1150 |
Precious metals and alloy |
|
|
|
ex 381510 |
| |
wastes (gold, silver, the platinum group) in a dispersible form |
|
|
|
ex 711510 |
| B1160 |
Precious metal ash from the incineration of printed circuit boards (note the related entry on list AA1150) |
|
|
|
|
| B1170 |
Precious metal ash from the incineration of photographic film |
|
|
|
ex 284310 |
| B1180 |
Waste photographic film containing silver halides and metallic silver |
|
|
|
|
| B1190 |
Waste photographic paper containing silver halides and metallic silver |
|
|
|
|
| B1200 |
Granulated slag arising from the manufacture of iron and steel* |
|
|
GC080 |
ex 261900 |
| B1210 |
Slag arising from the manufacture of iron and steel including slags as a source of Titanium dioxide and Vanadium** |
|
|
|
ex 261900 |
| * Import permitted in the country without any licence or restriction. |
| ** Slag and dross other than granulated, scalings and other wastes are restricted; import permitted with DGFT licence only for the purpose of reprocessing or reuse. |
| B1220 |
Slag from zinc production, chemically stabilized, having a high iron content (above 20%) and processed according to industrial specifications mainly for construction* |
|
|
|
ex 262030 |
| B1230 |
Mill scaling arising from manufacture of iron and steel |
|
|
|
ex 261900 |
| B1240 |
Copper Oxide mill-scale** |
|
|
|
|
| B2 |
Wastes containing principally inorganic constituents, which may contain metals and organic materials |
|
|
|
|
| B2010 |
Wastes from mining operations in non-dispersible form: |
|
|
|
|
| |
Natural graphite waste* |
|
|
GD010 |
250400 |
| |
Slate wastes*** |
|
|
|
|
| |
Mica wastes* |
|
|
|
|
| |
Leucite, nepheline and nepheline syenite waste* |
|
|
GD040 |
252930 |
| |
Feldspar waste (lumps & powder)* |
|
|
GD050 |
252910 |
| |
Fluorspar waste* |
|
|
GD060 |
252921 |
| |
Silica wastes in solid form excluding those used in foundry operations |
|
|
|
252922 |
| B2020 |
Glass wastes in non-dispersible form: |
|
|
|
|
| |
Cullet and other wastes and scrap of glass except for glass from cathode ray rubes and other activated glasses* |
|
|
|
|
| * Import permitted in the country without any licence or restriction. |
| ** Copper oxide mill scale are allowed for import in the country without DGFT licence to units (actual users) registered with MoEF upto an annual quantity limit indicated in the Registration Letter. |
| *** Restricted, import permitted in the country with DGFT licence only for the purpose of reprocessing or reuse. |
| B2030 |
Ceramic wastes in non-dispersible form: |
|
|
GF |
|
| |
Cermet wastes and scrap (metal ceramic composites)* Ceramic-based fibres |
|
|
GF020 |
ex 8113.00 |
| B2040 |
Other wastes containing principally inorganic constituents: |
|
|
GC |
|
| |
Partially refined calcium sulphate produced from flue gas desulphurisation (FGD) |
|
|
GC010 |
ex 262100 |
| |
Waste gypsum wall board or plasterboard arising from the demolition of buildings** |
|
|
|
|
| |
Sulphur in solid form** |
|
|
|
|
| |
Limestone from production of calcium cyanamide (pH<9)*** |
|
|
|
|
| |
Sodium, potassium, calcium chlorides** |
|
|
|
|
| |
Carborundum (silicon carbide) |
|
|
|
|
| |
Broken concrete |
|
|
|
|
| |
Lithium-tantalum & Lillium-niobium containing glass scraps |
|
|
|
|
| * Restricted, import permitted in the country with DGFT licence only for the purpose of reprocessing or reuse. |
| ** Import permitted in the country without any licence or restriction. |
| *** Import of limestone and other calcareous stones of a kind used for manufacture of lime or cement permitted in the country without any licence or restriction. |
| B2050 |
Coal-fired power plant fly-ash unless it contains any of the constituents mentioned in Schedule 2 to the extent of concentration limits specified therein |
|
|
|
|
| B2060 |
Spent activated carbon resulting from the treatment of potable water and processes of the food industry and vitamin production (note the related entry on List AA4160) |
|
|
|
|
| B2070 |
Calcium fluoride sludge |
|
|
AB050 |
ex 281800 |
| B2080 |
Waste gypsum arising from chemical industry processes unless it contains any of the constituents mentioned in Schedule 2 to the extent of concentration limits specified therein |
|
|
|
|
| B2090 |
Waste anode butts from steel or aluminium production made of petroleum coke or bitumen and cleaned to normal industry specifications (excluding anode butts from chlor alkali electrolyses and from metallurgical industry) |
|
|
|
|
| B2100 |
Waste hydrates of aluminium and waste alumina and residues from alumina production, arising from gas cleaning, flocculation filtration process |
|
|
|
ex 281800 |
| B2110 |
Bauxite residue ( red mud ) (pH moderated to less than 11.5) (note related entry on List A A4090) |
|
|
|
ex 260600 |
| B2120 |
Waste acidic or basic solutions with a pH greater than 2 and less than 11.5, which are not corrosive or otherwise hazardous (note the related entry on list A A4090) |
|
|
|
|
| B3 |
Wastes containing principally organic constituents, which may contain metals and inorganic materials |
|
|
|
|
| B3010 |
Solid plastic waste*: The following plastic or mixed plastic materials, provided they are not mixed with other wastes and are prepared to a specification: |
|
|
GH |
|
| |
Scrap plastic of non-halogenated polymers and copolymers, including but not limited to the following: |
|
|
|
|
| |
ethylene |
|
|
GH011 |
391590 |
| |
styrene |
|
|
GH012 |
391520 |
| |
polypropylene |
|
|
GH014 |
391590 |
| |
polyethylene eraphthalate |
|
|
GH014 |
391590 |
| |
acrylonitrile |
|
|
GH014 |
ex 391590 |
| |
butadiene |
|
|
GH014 |
ex 391590 |
| |
polyacetals |
|
|
|
|
| |
polyamides |
|
|
GH014 |
ex 391590 |
| |
polybutylene terephthalate |
|
|
GH014 |
ex 391590 |
| |
polycarbonates |
|
|
GH014 |
ex 391590 |
| |
polyethers |
|
|
|
|
| |
polythenylene sulphides |
|
|
GH014 |
ex 391590 |
| |
acrylic polymers |
|
|
GH014 |
ex 391590 |
| |
alkanes C10-C13 (plasticiser) |
|
|
|
|
| |
polyurethane (not containing CFCs) |
|
|
GH014 |
ex 391590 |
| |
polysiloxanes |
|
|
GH014 |
ex 391520 |
| |
polymethyl methacrylate |
|
|
GH014 |
ex 391520 |
| |
polyvinyl alcohol |
|
|
GH014 |
ex 391520 |
| |
polyvinyl butyral |
|
|
GH014 |
ex 391520 |
| |
polyvinyl acetate |
|
|
GH014 |
ex 391520 |
| * Restricted import permitted in the country with DGFT licence only for reprocessing or reuse [except polyethylene terephthalate (PET) bottle waste/scrap]. |
| |
Cured waste resins or condensation products including the following: |
|
|
|
|
| |
urea formaldehyde resins |
|
|
GH015 |
ex 391520 |
| |
phenol formaldehyde resins |
|
|
GH015 |
ex 391520 |
| |
melamine formaldehyde resins |
|
|
GH015 |
ex 391520 |
| |
epoxy resins |
|
|
GH015 |
ex 391520 |
| |
alkyd resins |
|
|
GH015 |
ex 391520 |
| |
polyamides |
|
|
GH015 |
ex 391520 |
| |
The following fluorinated polymer wastes (excluding post-consumer wastes): |
|
|
|
|
| |
Perfluoroethylene/propylene |
|
|
|
|
| |
Perfluoroalkoxy alkane |
|
|
|
|
| |
Perfluoroalkoxy alkane |
|
|
|
|
| |
Metalfuoroalkoxy alkanepolyvinylfluoride |
|
|
|
|
| |
polyvinylidenefluoride |
|
|
|
|
| B3020 |
Paper, paperboard and paper product wastes* |
|
|
|
|
| |
The following materials, provided they are not mixed with hazardous wastes: |
|
|
|
|
| |
Waste and scrap of paper or paperboard of: |
|
|
|
|
| |
unbleached paper or paperboard or of corrugated paper or paperboard; |
|
|
|
|
| |
other paper or paperboard, made mainly of bleached chemical pulp, not coloured in the mass; |
|
|
|
|
| * Import permitted in the country without any licence or restriction. |
| |
paper or paperboard made mainly of mechanical pulp (for example, newspapers, journals and similar printed matter); |
|
|
|
|
| |
other, including but not limited to (1) laminated paperboard (2) unsorted scrap. |
|
|
|
|
| B3030 |
Textile wastes |
|
|
|
|
| |
The following materials, provided they are not mixed with other wastes and are prepared to a specification: |
|
|
|
|
| |
Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock)* |
|
|
|
|
| |
not carded or combed, |
|
|
|
|
| |
other |
|
|
|
|
| |
Waste of wool or of fine or coarse animal hair, including yarn waste but excluding garnetted stock* |
|
|
|
|
| |
noils of wool or of fine animal hair |
|
|
|
|
| |
other waste wool or of fine animal hair |
|
|
|
|
| |
waste of coarse animal hair |
|
|
|
|
| |
Cotton waste (including yarn waste and garnetted stock)* |
|
|
|
|
| |
yarn waste (including thread waste) |
|
|
|
|
| |
garnetted stock |
|
|
|
|
| |
other |
|
|
|
|
| |
Flax tow and waste* |
|
|
|
|
| * Restricted, import permitted in the country with DGFT licence only for reprocessing or reuse. |
| Import permitted without DGFT licence, if material is in completely mutilated form conforming to the requirement specified by Customs authorities. |
| |
Tow and waste (including yarn waste and garnetted stock) of true hemp (Cannabis saliva L.)** |
|
|
|
|
| |
Tow and waste (including yarn waste and garnetted stock) of jute and other textile bast fibres (excluding flax, true hemp and ramie)** |
|
|
|
|
| |
Tow and waste (including yarn waste and garnetted stock) of sisal and other textile fibres of the genus Agave* |
|
|
|
|
| |
Tow, noils and waste (including yarn waste and garnetted stock) of coconut* |
|
|
|
|
| |
Tow, noils and waste (including yarn waste and garnetted stock) of abaca (Manila hemp or Musa textilis Nee)* |
|
|
|
|
| |
Tow, noils and waste (including yarn waste and garnetted stock of ramie and other vegetable textile fibres, not elsewhere specified or included |
|
|
|
|
| |
Waste (including noils, yarn waste and garnetted stock) of man-made fibres* |
|
|
|
|
| |
of synthetic fibres |
|
|
|
|
| |
of artificial fibres |
|
|
|
|
| |
Worn clothing and other worn textile articles |
|
|
|
|
| |
Used rags**, scrap twine, cordage, rope and cables and worn out articles of twine, cordage, rope or cables of textile materials sorted |
|
|
|
|
| * Import permitted in the country without any licence or restriction. |
| ** Restricted, import permitted in the country with DGFT licence only for reprocessing or reuse. Import of woollen rags/synthetic rags/shoddy wool permitted without licence if material is in completely mutilated form subject to the condition that mutilation must conform to the requirements as specified by Customs authorities. |
| B3040 |
Rubber wastes* |
|
|
|
|
| |
The following materials, provided they are not mixed with other wastes: |
|
|
|
|
| |
Waste and scrap of hard rubber (e.g. ebonite)* |
|
|
|
|
| |
Other rubber wastes (excluding such wastes specified elsewhere) |
|
|
|
|
| B3050 |
Untreated cork and wood waste |
|
|
|
|
| |
Wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar form* |
|
|
|
|
| |
Cork waste: crushed, granulated or ground cork* |
|
|
|
|
| B3060 |
Wastes arising from agro-food industries provided it is not infectious |
|
|
|
|
| |
Wine lees* |
|
|
|
|
| |
Dried and sterilized vegetable waste, residues and by-products, whether or not in the form of pellets, of a kind used in animal feeding, not elsewhere specified or included* |
|
|
GM100 |
050690 |
| |
Degras: residues resulting from the treatment of fatty substances or animal or vegetable waxes** |
|
|
GM110 |
ex 051191 |
| |
Waste of bones or horn cores unworked, defatted, simply prepared (but not cut to shape), treated with acid or degelatinised** |
|
|
|
|
| |
Fish waste** |
|
|
|
|
| * Import permitted in the country without any licence or restriction. |
| ** Prohibited under EXIM Policy (ITC-HS Classification). |
| |
Cocoa shells, husks, skins and other cocoa waste* |
|
|
|
|
| |
Other wastes arising from agro-food industry excluding by-products which meet national and international requirements and standards for human or animal consumption |
|
|
|
|
| B3070 |
The following wastes:* |
|
|
|
|
| |
Waste of human hair* |
|
|
|
|
| |
Waste straw* |
|
|
|
|
| |
Deactivated fungus mycelium from penicillin production to be used as animal feed |
|
|
|
|
| B3080 |
Waste parings and scrap of rubber** |
|
|
|
|
| B3090 |
Paring and other wastes of leather or of composition leather not suitable for the manufacture of leather articles, excluding leather sludges, not containing hexavalent chromium compounds and biocides (note the related entry on List AA3100) |
|
|
|
|
| B3100 |
Leather dust, ash, sludges or flours not containing hexavalent chromium compounds or biocides |
|
|
|
|
| B3110 |
Fellmongery wastes not containing hexavalent chromium compounds or biocides or infectious substances |
|
|
|
|
| B3120 |
Wastes consisting of food dyes* |
|
|
|
|
| * Import permitted in the country without any licence or restriction. |
| ** Restricted, import permitted in the country with DGFT licence only for reprocessing or reuse. |
| B3130 |
Waste polymer ethers and waste non-hazardous monomer ethers incapable of forming peroxides |
|
|
|
|
| B3140 |
Waste pneumatic tyres, excluding those which do not lead to resource recovery, recycling, reclamation or direct reuse* |
|
|
|
|
| B4 |
Wastes which may contain either inorganic or organic constituents |
|
|
|
|
| B4010 |
Wastes consisting mainly of water-based/latex paints, inks and hardened varnishes not containing organic solvents, heavy metals or biocides to an extent to render them hazardous (note the related entry on List AA4070) |
|
|
|
|
| B4020 |
Wastes from production, formulation and use of resins, latex, plasticizers, glues/adhesives, not listed in List A, free of solvents and other contaminants to an extent that they do not exhibit Annexure III characateristics, e.g. water-based, or glues based on casein starch, dextrin, cellulose ethers, polyvinyl alcohols (note the related entry on List AA3050) |
|
|
|
|
| B4030 |
Used single-use cameras, with batteries not included in List A |
|
|
|
|
| * Import permitted in the country without any licence or restriction |
PART B: LIST OF HAZARDOUS CHARACTERISTICS
| Code |
Characteristic |
| 1 |
Explosive |
| |
An explosive substance or waste is a solid or liquid substance or waste (or mixture of substances or wastes) which is in itself capable by chemical reaction of producing gas at such a temperature and pressure and at such speed as to cause damage to the surroundings (UN Class 1; HI). |
| 3 |
Flammable liquids |
|
| |
The word flammable has the same meaning as inflammable . Flammable liquids are liquids, or mixture of liquids, or liquids containing solids in solution or suspension (for example, paints, varnishes, lacquers, etc., but not including substances or wastes otherwise classified on account of their dangerous characteristics) which give off a flammable vapour at temperatures of not more than 60.5 C, closed-cup test, or not more than 65.5 C, open-cup test. (Since the results of open-cup tests and of closed-cup tests are not strictly comparable and even individual results by the same test are often variable, regulations varying from the above figures to make allowance for such differences would be within the spirit of this definition). |
| 4.1 |
Flammable solids |
| |
Solids, or waste solids, other than those classed as explosives, which under conditions encountered in transport are readily combustible, or may cause or contribute to fire through friction. |
| 4.2 |
Substances or wastes liable to spontaneous combustion |
| |
Substances or wastes which are liable to spontaneous heating under normal conditions encountered in transport, or to heating up on contact with air, and being then liable to catch fire. |
| 4.3 |
Substances or wastes which, in contact with water emit flammable gases |
| |
Substances or wastes which, by interaction with water, are liable to become spontaneously flammable or to give off flammable gases in dangerous quantities. |
| 5.1 |
Oxidizing |
| |
Substances or wastes which, while in themselves not necessarily combustible, may, generally by yielding oxygen causes, or contribute to, the combustion of other materials. |
| 5.2 |
Organic Peroxides |
| |
Organic substances or wastes which contain the bivalent-O-O-structure are thermally unstable substances which may undergo exothermic self-accelerating decomposition. |
| 6.1 |
Poisons (Acute) |
| |
Substances or wastes liable either to cause death or serious injury or to harm health if swallowed or inhaled or by skin contact. |
| 6.2 |
Infectious substances |
| |
Substances or wastes containing viable micro-organisms or their toxins which are known or suspected to cause disease in animals or humans. |
| 8 |
Corrosives |
| |
Substances or wastes which, by chemical action, will cause severe damage when in contact with living tissue, or, in the case of leakage, will materially damage, or even destroy, other goods or the means of transport; they may also cause other hazards. |
| 10 |
Liberation of toxic gases in contact with air or water |
| |
Substances or wastes which, by interaction with air or water, are liable to give off toxic gases in dangerous quantities. |
| 11 |
Toxic (delayed or chronic) |
| |
Substances or wastes which, if they are inhaled or ingested or if they penetrate the skin, may involve delayed or chronic effects, including carcinogenicity. |
| 12 |
Ecotoxic |
| |
Substances or wastes which if released present or may present immediate or delayed adverse impacts to the environment by means of bioaccumulation and/or toxic effects upon biotic systems. |
| 13 |
Capable by any means, after disposal, of yielding another material, e.g. leachate, which possesses any of the characteristics listed above. |
SCHEDULE 4
[See Rules 3(20), 19(1) and 20(1)]
LIST OF NON-FERROUS METAL WASTES APPLICABLE FOR REGISTRATION OF RECYCLERS
| Waste Category |
Waste Type |
| 1 |
2 |
| 1. |
Brass Scrap |
| 2. |
Brass Dross |
| 3. |
Copper Scrap |
| 4. |
Copper Dross |
| 5. |
Copper Oxide mill scale |
| 6. |
Copper reverts, cake and residue |
| 7. |
Waste Copper and copper alloys |
| 8. |
Slags from copper processing for further processing or refining |
| 9. |
Insulated Copper Wire Scrap/copper with PVC sheathing including ISRI-code material, namely Druid |
| 10. |
Jelly-filled copper cables |
| 11. |
Spent cleared metal catalyst containing copper |
| 12. |
Nickel Scrap |
| 13. |
Spent catalyst containing nickel, cadmium, zinc, copper and arsenic |
| 14. |
Zinc Scrap |
| 15. |
Zinc Dross-Hot dip Galvanizers SLAB |
| 16. |
Zinc Dross-Bottom Dross |
| 17. |
Zinc ash/skimmings arising from galvanizing and die casting operations |
| 18. |
Zinc ash/skimming/other zinc-bearing wastes arising from smelting and refining |
| 19. |
Zinc ash and residues including zinc alloy residues in dispersible form |
| 20. |
Spent cleared metal catalyst containing zinc |
| 21. |
Mixed non-ferrous metal scrap |
| 22. |
Lead acid battery plates and other lead scrap/ashes/residues not covered under Batteries (Management and Handling) Rules, 2001 |
SCHEDULE 551
[See Rule 3(34)]
SPECIFICATIONS FOR USED OIL SUITABLE FOR RE-REFINING
| Sl. No. |
Parameter |
Maximum Permissible Limit |
| 1 |
2 |
3 |
| 1. |
Colour |
8 hazen units |
| 2. |
Water |
15% |
| 3. |
Density |
0.85 to 0.95 |
| 4. |
Kinematic Viscosity cST at 100 C |
1.0 to 32 |
| 5. |
Dilutents |
15% vol. |
| 6. |
Neutralisation No. |
3.5 mg KOH/g |
| 7. |
Saponification value |
18 mg KOH/g |
| 8. |
Total halogens |
4000ppm |
| 9. |
Polychlorinated biphenyls (PCBs) |
Below detection limit |
| 10. |
Lead |
100 ppm |
| 11. |
Arsenic |
5 ppm |
| 12. |
Cadmium+Chromium+Nickel |
500 ppm |
| 13. |
Polyaromatic hydrocarbons(PAH) |
6% |
SCHEDULE 6
[See Rules 3(35) and 20(2)]
SPECIFICATIONS FOR WASTE OIL SUITABLE FOR RECYCLING
| Sl. No. |
Parameter |
Limit |
| 1 |
2 |
3 |
| 1. |
Sediment |
5% (maximum) |
| 2. |
Heavy Metals (cadmium+chromium+nickel+lead+arsenic) |
605 ppm maximum |
| 3. |
Polyaromatic hydrocarbons (PAH) |
6% maximum |
| 4. |
Total halogens |
4000 ppm maximum |
| 5. |
Polychlorinated biphenyls (PCBs) |
Below Detection Limit |
SCHEDULE 7
[See Rules 4(B) and 12(4)]
LIST OF AUTHORITIES AND CORRESPONDING DUTIES
| Sl. No. |
Authority |
Corresponding Duties |
| 1 |
2 |
3 |
| 1. |
Ministry of Environment and Forests under the Environment Protection Act, 1986 |
(i) |
Identification of hazardous wastes [Rule 3(14)] |
| |
|
(ii) |
Permission to exporters [Rule 14] |
| |
|
(iii) |
Permission to importers [Rule 13] |
| |
|
(iv) |
Registration of non-ferrous metal wastes and used oil/waste oil [Rule 20] |
| |
|
(v) |
Permission for transit of hazardous wastes through India [Rule 12(2)] |
| 2. |
Central Pollution Control Board constituted under the Water (Prevention and Control of Pollution) Act, 1974 |
(i) |
Co-ordination of activities of State Pollution Control Boards/Committees |
| |
|
(ii) |
Conduct training courses for authorities dealing with management of hazardous wastes |
| |
|
(iii) |
Recommend standards and specifications for treatment and disposal of wastes and leachates. Recommend procedures for characterization of hazardous wastes |
| |
|
(iv) |
Sector specific documentations to identify waste streams(s) for inclusion in Hazardous Wastes Rules |
| |
|
(v) |
Prepare guidelines to prevent/reduce/minimize the generation and handling of hazardous wastes |
| |
|
(vi) |
Any other function under Rules delegated by the Ministry of Environment and Forests |
| 3. |
State Government/Union Territory Government/ Administration |
(i) |
Identification of site(s) for common treatment, storage and disposal facility (TSDF) [Rule 8(2)] |
| |
|
(ii) |
Assess EIA reports and convey the decision of approval of site or otherwise [Rule 8(6)] |
| |
|
(iii) |
Acquire the site or inform operator of facility or occupier or association of occupiers to acquire the site [Rule 8(7)] |
| |
|
(iv) |
Notification of sites [Rule 8(7)] |
| |
|
(v) |
Publish periodically an inventory of all disposal sites in the State/Union Territory [Rule 8(7)] |
| 4. |
State Pollution Control Boards or Pollution Control Committees constituted under the Water (Prevention and Control of Pollution) Act, 1974 |
(i) |
Inventorisation of hazardous wastes [Rule 9(3)] |
| |
|
(ii) |
Grant and renewal of authorisation [Rule 5] |
| |
|
(iii) |
Monitoring of compliance of various provisions and conditions of authorisation including exports and imports |
| |
|
(iv) |
Issue of public notice and conduct public hearing [Rule 8(4)] |
| |
|
(v) |
Examining the applications for imports submitted by the importers and forwarding the same to Ministry of Environment and Forests [Rule 13(1) & (2)] |
| |
|
(vi) |
Implementation of programmes to prevent/reduce/minimise the generation of hazardous wastes |
| |
|
(viii) |
Action against violations of Hazardous Wastes (Management and Handling) Rules, 1989 |
| 5. |
Directorate-General of Foreign Trade constituted under the Foreign Trade (Development and Regulation) Act, 1992 |
(i) |
Grant of licence for import of hazardous wastes [Rule 13(5)] |
| |
|
(ii) |
Refusal of licence for hazardous wastes prohibited for imports or exports [Rule 12(7)] |
| 6. |
Port Authority under Indian Ports Act, 1908 (15 of 1908) and Customs Authority under the Customs Act, 1962 (52 of 1962). |
(i) |
Verify the documents [Rule 13(6)] |
| |
|
(ii) |
Inform the Ministry of Environment and Forests of any illegal traffic [Rule 15] |
| |
|
(iii) |
Analyse wastes permitted for imports and exports |
| |
|
(iv) |
Train officials on the provisions of the Hazardous Wastes Rules and in the analysis of hazardous wastes |
| |
|
(v) |
Take action against export/import violations under the Indian Ports Act, 1908/Customs Act, 1962 |
SCHEDULE 8
[See Rule 12(1)]
HAZARDOUS WASTES PROHIBITED FOR IMPORT AND EXPORT
| Sl. No. |
Basel* No. |
OCED** No. |
Description of material |
| 1 |
2 |
3 |
4 |
| 1 |
A1010 |
AA100 |
Mercury |
| 2 |
A1030 |
AA100 |
Waste having Mercury: Mercury Compounds as constituents or contaminants |
| 3 |
A1010 |
AA070 |
Beryllium |
| 4 |
A1020 |
AA070 |
Waste having Beryllium: Beryllium Compounds as constituents or contaminants |
| 5 |
A1010 |
AA090 |
Arsenic |
| 6 |
A1030 |
AA090 |
Waste having Arsenic: Arsenic compounds as contituents or contaminants |
| 7 |
A1010 |
AA070 |
Selenium |
| 8 |
A1020 |
AA070 |
Waste having Selenium: Selenium Compounds as constituents or contaminants |
| 9 |
A1010 |
AA080 |
Thallium |
| 10 |
A1030 |
AA080 |
Waste having Thallium: Thallium Compounds as constituents or contaminants |
| 11 |
A1040 |
AA070 |
Hexavalent Chromium Compounds |
| 12 |
A1140 |
|
Wastes Cupric Chloride and Copper Cyanide Catalysts |
| 13 |
A2020 |
|
Waste inorganic fluorine compounds in the form of liquids or sludge but excluding calcium flurodie sludge |
| 14 |
A2040 |
|
Waste gypsum arising from chemical industry processes if it contains any of the constituents mentioned in Schedule 2 to the extent of concentration limits specified therein |
| 15 |
A2050 |
RB010 |
Waste Asbestos (Dust and Fibres) |
| 16 |
A2060 |
|
Coal-fired power plant fly ash if it contains any of the constituents mentioned in Schedule 2 to the extent of concentration limits specified therein |
| 17 |
A3030 |
|
Wastes that consist of or are contaminated with leaded antiknock compound sludge or leaded petrol (gasoline) sludges |
| 18 |
A3040 |
|
Waste thermal (heat transfer) fluids |
| 19 |
A3060 |
|
Waste Nitrocellulose |
| 20 |
A3090 |
|
Waste leather dust, ash, sludges and flours when containing hexavalent chromium compounds or biocides. |
| 21 |
A3100 |
|
Waste paring and other waste of leather or of composition leather not suitable for the manufacture of leather articles containing hexavalent chromium compounds or biocides. |
| 22 |
A3110 |
|
Fellmongery wastes containing hexavalent chromium compounds or biocides or infectious substances |
| 23 |
A3150 |
|
Waste halogenated organic solvents. |
| 24 |
A3180 |
AC120 |
Waste, substances and articles containing, consisting of or contaminated with polychlorinated biphenyles (PCB) and/or polychlorinated terphenyls (PCT) and/or polychlorinated napthalenes (PCN) and/or polybrominated biphyenyles (PBB) or any other polybrominated analogues of these compounds. |
| 25 |
A3190 |
|
Waste tarry residues (excluding asphalt cements) arising from refining, distillation and pyrolitic treatment of organic materials |
| 26 |
A4020 |
|
Clinical and related wastes; that is wastes arising from medical, nursing, dental, veterinary, or similar practices and wastes generated in hospital or other facilities during the investigation or treatment of patients, or research projects. |
| 27 |
A4030 |
AD020 |
Waste from the production, formulation and use of biocides and phyto-pharmaceuticals, including waste pesticides and hebicides which are off-specification, out-dated, and/or unfit for their originally intended use |
| 28 |
A4050 |
AD040 |
Wastes that contain, consist of, or are contaminated with any of the following: |
| |
|
|
Inorganic cyanides, excepting precious metal-bearing residues in solid form containing traces of inorganic cyanides |
| |
|
|
Organic cyanides |
| 29 |
A4060 |
|
Waste oil/water, hydrocarbons/water mixtures, emulsions] |
* Basel Convention on/Control of Transboundary Movement of Hazardous Waste and their Disposal.
** Organisation for Economic Cooperation and Development.
52 [FORM 1
[See Rules 3(2), 5(2), 5(3) and (6)(ii)]
Application for Obtaining Authorisation for Collection/Reception/ Treatment/Transports/Storage/Disposal of Hazardous Waste*
From . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
To
The Member-Secretary
. . . . . . . Pollution Control Board,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sir,
I/We hereby apply for authorisation/renewal of authorisation under sub-rules (2) and (3) and clause (ii) of sub-rule (6) of Rule 5 of the Hazardous Wastes (Management and Handling) Rules, 1989 for collection/reception/treatment/transport/storage/disposal of hazardous wastes.
* Delete whichever is not applicable.
5. Code No.:
6. Whether the unit is situated in a critically polluted area as identified by Ministry of Environment and Forests:
| To be filled in by Applicant |
PART A
General
3. (a) Name and address of the unit and location of activity:
(b) Authorisation required for (Please tick mark appropriate activity/activities):
(i) collection
(ii) reception
(iii) treatment
(iv) transport
(v) storage
(vi) disposal
(c) In case of renewal of authorisation previous authorisation number and date:
4. (a) Whether the unit is generating hazardous wastes as defined in the Hazardous Wastes (Management and Handling) Rules, 1989 and amendments made thereunder:
(b) If so the type and quantity of wastes
5. (a) Total capital invested on the project:
(b) Year of commencement of production:
(c) Whether the industry works general/2 shifts/round the clock:
6. (a) List and quantum of products and by-products:
(b) List and quantum of raw materials used:
7. Furnish a flow diagram of manufacturing process showing input and output in terms of products and waste generated including for captive power generation and demineralised water:
PART B
Sewage and trade effluent
8. Quantity and source of water for:
(a) Cooling m3/d:
(b) Process m3/d:
(c) Domestic use m3/d:
(d) Others m3/d:
9. Sewage and trade effluent discharge:
(a) Quantum of discharge m3/d:
(b) Is there any effluent treatment plant:
(c) If yes, a brief description of unit operations with capacity:
(d) Characteristics of final effluent:
pH
Suspended solids
Dissolved solids
Chemical Oxygen Demand (COD)
Biochemical Oxygen Demand *[(BOD/20 C)/BOD/27 C]
Oil and grease
(Additional parameters as specified by the concerned Pollution Control Board)
(e) Mode of disposal and final discharge point:
(Enclose map showing discharge point):
(f) Parameters and Frequency of self-monitoring:
[*] Read BOD (3 days at 27 C)
PART C
Stack (Chimney) and vent emissions
10. (a) Number of stacks and vents with height and dia (m):
(b) Quality and quantity of stack emission from each of the above stacks-particulate matter and Sulphur Dioxide (SO2) (Additional parameters as specified by the concerned Pollution Control Board):
(c) A brief account of the air pollution control unit to deal with the emission:
(d) Parameters and Frequency of self-monitoring:
PART D
Hazardous Waste
11. Hazardous Wastes:
(a) Type of hazardous wastes generated as defined under the Hazardous Wastes (Management and Handling) Rules, 1989:
(b) Quantum of hazardous waste generated:
(c) Mode of storage within the plant, method of disposal and capacity:
12. (a) Hazardous Chemicals as defined under the Manufacture, Storage and Import of Hazardous Chemicals Rules, 1989:
| (b) Whether any isolated storage is involved (If yes, attach details) |
Yes/No |
PART E
Treatment, Storage and Disposal Facility
13. Detailed proposal of the facility (to be attached) to include:
(i) Location of site (provide map)
(ii) Name of waste-processing technology
(iii) Details of processing technology
(iv) Type and Quantity of waste to be processed per day
(v) Site clearance (from local authority, if any)
(vi) Utilization programme for waste processed (Product Utilization)
(vii) Method of disposal (details in brief be given)
(viii) Quantity of waste to be disposed per day
(ix) Nature and composition of waste
(x) Metholodogy and operational details of landfilling/incineration
(xi) Measures to be taken for prevention and control of environmental pollution including treatment of leachates
(xii) Investment on Project and expected returns
(xiii) Measures to be taken for safety of workers working in the plant
| Plate: |
Signature:. . . . . . . . . . . . . . . . . |
| Date: |
Designation. . . . . . . . . . . . . . . .] |
FORM 2
[See Rules 3(c) and 5(5)]
53 [Form for Grant of authorisation for occupier or operator handling hazardous wastes]
1. Number of authorisation and date of issue. . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . of . . . . . . . . . . . . . . . . . . . . . . . . . . is hereby granted an authorisation to operate a facility for collection, reception, treatment, storage, transport and disposal of hazardous waste on the premises situated at . . . . . . . . . . . . . . . . . . . . . . . . .
3. The authorisation granted to operate a facility for collection, reception, treatment, storage, transport and disposal of hazardous wastes.
4. The authorisation shall be in force for a period of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .years from the date of issue.
5. The authorisation is subject to the conditions stated below and to such conditions as may be specified in the rules for the time being in force under the Environment (Protection) Act, 1986.
| Date . . . . . . . . . . . |
Signature. . . . . . . . . . . . . . . . . |
| |
Designation. . . . . . . . . . . . . . . . |
Terms and conditions of authorisation
1. The authorisation shall comply with the provisions of the Environment (Protection) Act, 1986, and the rules made thereunder.
2. The authorisation or its renewal shall be produced for inspection at the request of an officer authorised by the State Pollution Control Board 54[or Committee].
3. The person authorised shall not rent, lend, sell, transfer or otherwise transport the hazardous wastes without obtaining prior permission of the State Pollution Control Board 55[or Committee
4. Any unauthorised change in personnel, equipment or working conditions as mentioned in the application by the person authorised shall constitute a breach of his authorisation.
5. It is the duty of the authorised person to take prior permission of the State Pollution Control Board [or Committee]56 to close down the facility.
6. An application for the renewal of an authorisation shall be made as laid down in Rule 5(6)(ii).
FORM 3
[See Rule 9(1)]
Format for maintaining records of hazardous wastes at the facility
1. Name and address of the occupier or operator of a facility:
2. Date of issuance of authorisation and its reference number:
3. Description of hazardous waste:
| Physical form with description |
Chemical form |
Total volume and weight (in kgs) |
4. Description of storage and treatment of hazardous waste:
| Date |
Method of storage of hazardous waste |
Date |
Method of treatment of hazardous wastes |
| |
|
|
|
5. Details of transportation of hazardous waste:
| Name and address of the consignee of the package |
Mode of packing of the waste for transportation |
Mode of transportation to site of disposal |
Date of transportation |
| |
|
|
|
6. Details of disposal of hazardous waste:
| Date of disposal |
Concentration of hazardous material in the final waste form |
Site of disposal (identify the location on the relevant layout drawing for reference) |
Method of disposal |
Persons involved in disposal |
| |
|
|
|
|
| |
|
|
|
|
7. Data on environmental surveillance:
| Date of measur-ement |
Analysis of groundwater |
Analysis of soil samples |
Analysis of air sampling |
Analysis of any other samples |
| |
Location of sampling |
Depth of sampling |
Data |
Location of sampling |
Depth of sampling |
Data |
Location of sampling |
Data |
(give details) |
| |
|
|
|
|
|
|
|
|
|
| Name and signature of the Head of Facility |
57[8. Details of the hazardous wastes reused and recycled
| Date |
Total quantity of hazardous waste generated |
Details of hazardous waste minimisation activity |
Material received |
Final quantity of waste generated |
Net reduction in waste generation quantity and percentage |
| |
|
|
|
|
|
| Place: |
|
|
|
Signature |
| Date: |
|
|
|
Designation] |
58 [FORM 4
[See Rule 9(2)]
Form for Filing Returns Regarding Handling of Hazardous Wastes
(To be submitted to the State Pollution Control Board/Committee by 31st January of every year)
1. Name and address of the Occupier/Operator of Facility:
2. Categories of wastes generated and quantity (in metric tonnes):
3. Details of waste-treatment operations:
4. Details of waste-disposal operations:
| Sl. No. |
|
Description of Hazardous Waste |
| |
Date of issuance of authorisation for the disposal of hazardous waste and its reference number |
Physical form and contents |
Chemical form |
Total volume of the hazardous waste disposed with number of packages |
Mode of transportation to the site of disposal |
Site of disposal [attach a sketch showing the location(s) of disposal] |
Brief description of the method of disposal |
Date of disposal |
Remarks (if any) |
| 1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
| |
|
|
|
|
|
|
|
|
|
5. Details of environmental surveillance:
| Date of other measurement details |
Analysis of groundwater samples |
Analysis of soil samples |
Analysis of air sampling |
Analysis of any samples (give details) |
| |
Location of sampling |
Depth of sampling |
Data |
Location of sampling |
Depth of sampling |
Data |
Location of sampling |
Data |
|
| |
|
|
|
|
|
|
|
|
|
| Place |
Signature |
| Date |
Designation] |
FORM 5
[See Rule 10]
1. The date and time of the accident:
2. Sequence of events leading to accident:
3. The hazardous waste involved in the accident:
4. The data for assessing the effects of the accident on health or the environment:
5. The emergency measures taken:
6. The steps taken to alleviate the effects of accidents:
7. The steps taken to prevent the recurrence of such an accident.
| 59[Place |
Signature |
| Date |
Designation] |
60 [FORM 6
[See Rule 13(1)]
Application for importing hazardous/recyclable wastes as raw materials
From: . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
TO BE MAILED BY IMPORTER
To
The Member-Secretary,
State Pollution Control Board,
. . . . . . . . . . . . . . . . . . . .
Sir,
I/We apply for No Objection of authorisation under sub-rule (1) of Rule 13 of the Hazardous Wastes (Management & Handling) Rules, 1989, amended in 1999 for importing/exporting hazardous/recyclable wastes to use as raw materials.
1. Code No.: :
2. Whether the unit is situated in a critically polluted :
area as identified by the Ministry of Environment and Forests:
| TO BE FILLED IN BY APPLICANT |
PART I: (To be filled by exporter or a person authorised by the exporter)
1. Name and Address of the Exporter
2. Details of material (hazardous wastes in the form of raw material) to be exported
| Sl. No. |
Particulars |
Six digit Code No.* |
Purity expected |
Quantity |
Whether any special handling requirement? |
| |
|
|
|
|
|
| |
|
|
|
|
|
3. The material permitted shall be fully insured for transit as well as for any accidental occurrence and its clean-up operation.
4. The exported material shall be taken back, if it creates a genuine environmental hazard or shall take all such measures to treat and dispose in an environmentally benign manner upto the satisfaction of concerned SPCB. All such costs involved in such operation shall be borne by Exporter and/or Importer.
PART II: (To be filled in by Importer)
1. Name and Address:
2. Whether Authorisation is obtained in Form 2: Yes/No
on application made in Form 1 (enclose copy)
3. Details of material to be imported
| Sl No. |
Particulars |
Six digit Code No.* |
Purity expected |
Quantity |
Whether any special handling requirement? |
| |
|
|
|
|
|
| |
|
|
|
|
|
* (Here enter as reference nomenclature, the equivalent six digit Code No. from European Waste Catalogue (EWC) issued pursuant to Article 1(a) of Council Directive 75/442/EEC on waste or its equivalent as the case may be.)
4. Whether you have received such imported hazardous wastes in the form of raw materials in the past and if yes give details
| S. No. |
Name of Material |
Country of Export |
Year |
Quantity in tonnes |
| |
|
|
|
|
5. Whether the importer has:
| |
(a) |
Adequate facility to handle imported hazardous waste in the form of his raw material, if yes, furnish details |
Yes/No |
| |
(b) |
Adequate facility to handle the hazardous wastes generated by the use of such imported hazardous wastes in the form of his raw material |
Yes/No |
| |
(c) |
Requisite laboratory testing facility |
Yes/No |
6. Break-up of the imported material
(a) The total quantity applied for . . . . . . . . . . . . . . . T
(b) Out of (a) above, how much quantity after initial in-situ purification, will be available as raw material . . . . . . . . . . . . . T
(c) Out of (b) above, how much quantity will be converted to be the useful product or co-product . . . . . . . . . . . . . . . . T
7. Means of Transport (Road, Rail, inland waterway, sea, air) including country of export, transit and import, also point of entry and exit where these have been designated.
8. Information on special handling requirements including emergency provision in case of accident.
(Attach separate sheet)
9. Undertaking:
I hereby solemnly undertake that
1. The full consignment shall be cleared in one lot by arranging authorised transporter under my supervision with due prior intimation to the Board, District Collector and Police Station and the imported material shall be admitted in an enclosure especially provided in the premises.
2. The material permitted shall be fully insured for transit as well as for any accidental occurrence and its clean-up operation.
3. The record of consumption and fate of the imported material shall be monitored and report sent to the Board every fortnight.
4. At every step of consumption of 25, 50, 75 and 100% of the imported material, the situation in the store shall be shown to the Board authority at our cost.
5. The hazardous wastes which gets generated in our premises by the use of imported hazardous wastes in the form of raw material, shall be treated and disposed of and only as per conditions of authorisation.
6. I/We agree to share the cost and joint to exporter in undertaking the measures as per undertaking given by Exporter at Part A, Column No. 12(3) of this Form 6.
7. I am aware that there are significant penalties for submitting a false certificate/undertaking/disobedience of the rules and lawful orders including the possibility of fine and imprisonment.
| Exporter |
Signature |
| |
Designation |
Date . . . . . . . . . . . . . . .
Place . . . . . . . . . . . . . .
| Importer |
Signature |
| |
Designation |
Date . . . . . . . . . . . .
Place . . . . . . . . . . . .
FORM 6-A
[See Rule 13(8)]
Format for maintaining records of hazardous waste imported and exported
1. Name and address of the importer:
2. Date and reference number of issuance of permission to import hazardous wastes:
3. Description of hazardous waste:
(a) Physical form:
(b) Chemical form:
(c) Total volume and weight (in kilograms):
(d) Test report as per Rule 13(6):
4. Description of storage, treatment and reuse of hazardous waste:
(a) Date:
(b) Method of Storage:
(c) Method of treatment and reuse (give details):]