40 C.F.R. § 261.20 : Protection of Environment — ENVIRONMENTAL PROTECTION AGENCY — SOLID WASTES — IDENTIFICATION AND LISTING OF HAZARDOUS WASTE — CHARACTERISTICS OF HAZARDOUS WASTE — General

(a) A solid waste, as defined in §261.2, which is not excluded from regulation as a hazardous waste under §261.4(b), is a hazardous waste if it exhibits any of the characteristics identified in this subpart.

[Comment:§262.11 of this chapter sets forth the generator's responsibility to determine whether his waste exhibits one or more of the characteristics identified in this subpart]

(b) A hazardous waste which is identified by a characteristic in this subpart is assigned every EPA Hazardous Waste Number that is applicable as set forth in this subpart. This number must be used in complying with the notification requirements of section 3010 of the Act and all applicable recordkeeping and reporting requirements under parts 262 through 265, 268, and 270 of this chapter.
(c) For purposes of this subpart, the Administrator will consider a sample obtained using any of the applicable sampling methods specified in appendix I to be a representative sample within the meaning of part 260 of this chapter.

[ Comment: Since the appendix I sampling methods are not being formally adopted by the Administrator, a person who desires to employ an alternative sampling method is not required to demonstrate the equivalency of his method under the procedures set forth in §§ 260.20 and 260.21.]

40 C.F.R. §261.20

45 FR 33119, 5/19/1980, as amended at 51 FR 40636, 11/7/1986; 55 FR 22684, 6/1/1990; 56 FR 3876, 1/31/1991