Translate
Text Highlighter

Bookmark

PDF

Share

Report a problem
AMICUS AI
Citation Codes
Equivalent Citations
citation codes
Case Number
Attorney(S)
Judges
Acts
  • Section 18(1) read with Section 36(1) of the Legal Metrology Act, 2009.12. Rule 11 of the Legal Metrology (Packaged Com-modities) Rules, 2011 provides, as under:11. General provisions
  • Rule 11(2)(3) and (4) of the Legal Metrology (Packed Commodities) Rules, 2011 as amended by (Amendment) Rules, 2016 read with Section 18 of the Legal Metrology Act, 2009
  • Section 18 of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2011 as amended by (Amendment) Rules, 2016.2.
  • Section 18(1) read with Section 36(1) of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2011.
  • Section 18 of the Le-gal Metrology Act, 2009 read with Rule 11(2) of the Le-gal Metrology (Packaged Commodities) Rules, 2016;
  • Section 18 of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2011;
  • SECTION 18 LEGAL METROLOGY ACT 2009
  • Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2016.9.
  • dealer.16. Rule 21 of the Legal Metrology (Packaged Commodities) Rules, 2011
  • Rule 11(2)(3) of the Legal Metrology (Packaged Commodi-ties) Rules, 2016
  • Rule 6(4) of the Legal Metrology (Packaged Commodities) Rules, 2011,
  • incident.19. Section 468 of the Code of Criminal Procedure, 1973
  • Commodities) Rules, 2011 as amended by (Amendment) Rules, 2016
  • Court Section 482 of the Code of Criminal Procedure, 1973
  • Rule 19 Legal Metrology (Packaged Commodities) Rules, 2011,
  • Section 469(1) of the Code of Criminal Procedure, 1973
  • Section 468 of the Code of Criminal Procedure, 1973
  • Section 34(2) of the Legal Metrology Act, 2009,
  • Section 38(1) of the Legal Metrology Act, 2009
  • LEGAL METROLOGY ACT 2009
  • PREVENTION OF FOOD ADULTERATION ACT 1954
  • Sub-section (2) of Section 468
  • provisions of sub-rule (1),
  • sub-rule (4),
Are you a practicing lawyer?
Enhance your digital presence and reach by creating a Casemine profile.
Upload pleading to use the new AI search
Cites
Cited by
Citation Codes
Equivalent Citations
citation codes
Case Number
Attorney(S)
Judges
Acts
  • Section 18(1) read with Section 36(1) of the Legal Metrology Act, 2009.12. Rule 11 of the Legal Metrology (Packaged Com-modities) Rules, 2011 provides, as under:11. General provisions
  • Rule 11(2)(3) and (4) of the Legal Metrology (Packed Commodities) Rules, 2011 as amended by (Amendment) Rules, 2016 read with Section 18 of the Legal Metrology Act, 2009
  • Section 18 of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2011 as amended by (Amendment) Rules, 2016.2.
  • Section 18(1) read with Section 36(1) of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2011.
  • Section 18 of the Le-gal Metrology Act, 2009 read with Rule 11(2) of the Le-gal Metrology (Packaged Commodities) Rules, 2016;
  • Section 18 of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2011;
  • SECTION 18 LEGAL METROLOGY ACT 2009
  • Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2016.9.
  • dealer.16. Rule 21 of the Legal Metrology (Packaged Commodities) Rules, 2011
  • Rule 11(2)(3) of the Legal Metrology (Packaged Commodi-ties) Rules, 2016
  • Rule 6(4) of the Legal Metrology (Packaged Commodities) Rules, 2011,
  • incident.19. Section 468 of the Code of Criminal Procedure, 1973
  • Commodities) Rules, 2011 as amended by (Amendment) Rules, 2016
  • Court Section 482 of the Code of Criminal Procedure, 1973
  • Rule 19 Legal Metrology (Packaged Commodities) Rules, 2011,
  • Section 469(1) of the Code of Criminal Procedure, 1973
  • Section 468 of the Code of Criminal Procedure, 1973
  • Section 34(2) of the Legal Metrology Act, 2009,
  • Section 38(1) of the Legal Metrology Act, 2009
  • LEGAL METROLOGY ACT 2009
  • PREVENTION OF FOOD ADULTERATION ACT 1954
  • Sub-section (2) of Section 468
  • provisions of sub-rule (1),
  • sub-rule (4),
Smart Summary

Factual and Procedural Background

The petitioners, operating retail outlets known as Choupal Sagar/Farmer Facility Centres under the initiative e-Choupal, sought to improve farmers' access to goods and markets. They held a license under the Prevention of Food Adulteration Act, 1954, for dealing in food products. On 16.07.2012, a Legal Metrology Inspector visited one such outlet and took samples of packaged “Gagan Toor Dal” which allegedly violated the Legal Metrology Act, 2009 and its associated rules. The petitioners received notices alleging violations under Section 18 of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2011. The petitioners responded denying any violation, emphasizing that they were retailers and not manufacturers or packers, and that the alleged irregularity concerned additional words on the label rather than missing mandatory declarations. The manufacturer admitted fault and paid a fine. Despite this, criminal proceedings were initiated against the petitioners, leading to cognizance being taken by the Judicial Magistrate First Class, Nagda, District Ujjain (MP). The petitioners challenged this order seeking quashment of the proceedings.

Legal Issues Presented

  1. Whether the petitioners, as retail dealers and not manufacturers or packers, can be held liable under Section 18 of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2016 for alleged label declaration violations.
  2. Whether the complaint filed against the petitioners is barred by limitation under Section 468 of the Code of Criminal Procedure, 1973, considering the delay in filing the complaint beyond the prescribed period.
  3. Whether the learned Magistrate erred in taking cognizance of the offence without satisfying itself about the delay in filing the complaint.
  4. Whether the prosecution against petitioners No. 2 and 3 is maintainable given that the company is a single legal entity and the retail shop is not separate.

Arguments of the Parties

Petitioners' Arguments

  • The petitioners argued they are retail dealers and not manufacturers or packers; therefore, they are not responsible for label declaration violations.
  • The additional words “when packed” on the package label do not constitute a violation of Section 18 of the Legal Metrology Act, 2009.
  • The manufacturer admitted fault and paid a fine, and the offence against the manufacturer was compounded, thus proceedings against the petitioners should not continue.
  • The complaint is barred by limitation as it was filed more than ten months after the alleged offence, exceeding the three-month limitation period applicable to fines under the Legal Metrology Act and the six-month limitation under Section 468 Cr.P.C.
  • The prosecution against individual petitioners is bad in law because the company and its retail shop are not separate legal entities.

Respondent's Arguments

  • The respondent contended that the complaint discloses commission of an offence punishable under Section 18 of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2016.
  • There was no error in the Magistrate taking cognizance against the petitioners for the said offence.
  • The respondent sought dismissal of the petition as devoid of merits.

Table of Precedents Cited

No precedents were cited in the provided opinion.

Court's Reasoning and Analysis

The Court examined the complaint and statutory provisions related to declarations on pre-packaged commodities under the Legal Metrology Act, 2009 and the relevant rules. It noted that the petitioners were retailers who had not tampered with or altered the declarations on the packages, which were the responsibility of the manufacturer/packer. The manufacturer admitted fault and paid the fine, and the offence against it was compounded.

The Court analyzed Rule 11 of the Legal Metrology (Packaged Commodities) Rules, 2011, particularly the prohibition on qualifying quantity declarations with the words “when packed,” except in specified circumstances under the Third Schedule. It found that additional words on the label do not constitute a violation of Section 18 of the Legal Metrology Act, 2009.

Critically, the Court focused on the limitation period under Section 468 of the Code of Criminal Procedure, 1973, which bars cognizance of offences punishable with fine only after six months. Since the complaint was filed over ten months after the alleged offence without any application for condonation of delay, the Court held that the Magistrate erred in taking cognizance.

The Court also observed that the prosecution against individual petitioners was legally flawed, as the company and its retail shop are not distinct legal entities.

Holding and Implications

The Court quashed the order dated 20.05.2013 taking cognizance and the proceedings in Criminal Case No. 381/2013 against the petitioners under Section 18 of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2016.

The direct effect of this decision is the termination of criminal proceedings against the petitioners. The Court did not set any new precedent but emphasized the importance of limitation periods and the proper party against whom prosecution should be initiated under the Legal Metrology Act.

    Itc Limited v. State Of Madhya Pradesh

    S.K. Awasthi, J.:— The petitioners have invoked the extraordinary jurisdiction of this Court Section 482 of the Code of Criminal Procedure, 1973 (for brevity, Cr.P.C.) seeking quashment of proceedings in Criminal Case No. 381/2013 pending before the Judicial Magistrate First Class, Nagda, District Ujjain (MP) in furtherance of Crime No. 34/2012-13 registered at Department of Legal Metrology, Weights & Measurement Inspector (Mr. P.S. Barapatra), Badnagar, District Ujjain (MP) and order dated 20.05.2013, whereby cognizance has been taken against the petitioners for offence punishable under Section 18 of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2011 as amended by (Amendment) Rules, 2016.

    2. The facts leading to filing of the instant peti-tion are that the petitioners have launched some farmer friendly initiatives like e-Choupal. Through this initia-tive, it has made available to farmers in remote villages various goods and services at affordable rates and provides an easy access to markets for their agricultural goods. This e-Choupal is called Choupal Sagar/Farmer Facility Centres, so that the living standard of farmers be improved.

    3. The petitioners have obtained necessary li-cense for dealing in food products under the Prevention of Food Adulteration Act, 1954. On 16.07.2012, respon-dent - Legal Metrology Inspector, Badnagar, District Uj-jain (MP) visited Choupal Sagar situated at Ingoria Road, Nagda, District Ujjain (MP) where the respondent took samples of two sealed packages of “Gagan Toor Dar”, 5 Kilograms (when packed), Batch No. 102, packed on 27.06.2012, MRP Rs. 500.00/- letha 82 Packed on 07.05.2012 MRP Rs. 400.00/- manufactured by Padam International, 23, Mangal Udyog Nagar, Indore (MP).

    4. The petitioners received letter dated 13.08.2012 and 03.10.2012 from the respondent thereby alleging that the aforesaid seized packet of Toor Dal was not in accordance with the provisions of the Legal Metrology Act, 2009 and the petitioners have violated the provisions envisaged under Section 18 of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2011; and have also called the petitioners to furnish the details for the original bill of purchase of the said product, list of Di-rectors of the Company and the Memorandum of Articles & Association of the Company. The petitioners vide its letter dated 04.09.2012 provided alleged information to the respondent being sought vide letter dated 13.08.2012.

    5. Vide letter dated 15.10.2012, the petitioners submitted detailed reply to the notices dated 13.08.2012 and 03.10.2012 in which it was clearly mentioned that there is no violation of Section 18 of the Legal Metrology Act, 2009, because the provisions of said section can only be invoked when the declaration and particulars are not printed on the labels/packages in the manner prescribed in the Legal Metrology (Packaged Commodities) Rules, 2011. Any additional words printed on the label do not constitute violation of Section 18 of the Legal Metrology Act, 2009. The alleged violation was not re-lating to any declaration or particulars not being present on the package and was relating to use of additional words, thus, there was no illegality in the same. The re-quirement in the III Schedule for using words “when packed” was in reference to the goods on which words “when packed” have to be mandatorily used. However, use on the said words for other commodities do not vio-late the Legal Metrology Act, 2009 and the Legal Metrol-ogy (Packaged Commodities) Rules, 2011. As per Rule 19 Legal Metrology (Packaged Commodities) Rules, 2011, any inspection of labels shall be done at the premises of the manufacturer/packer. However, as the ITC Limited was neither the manufacturer nor the packer, no inspec-tion for the same could be carried out in the premises of the company. Further as per Rule 6(4) of the Legal Metrology (Packaged Commodities) Rules, 2011, the re-sponsibility for making proper declaration on labels is of the manufacturer/packer, who packs any commodity for sale, distribution or delivery. It is further pointed out that the petitioner is a retailer and the petitioner had not meddled with or tampered the declaration made on the label. In case of any default, the same is only attributable to the manufacturer/packer. The product was manufac-tured by “Padam International”, 23, Mangal Udyog Na-gar, Indore (MP) and the petitioners had purchased the said package from M/s. Jain Traders, 40/3, Kalani Mo-halla, Indore. Therefore, the petitioners have not com-mitted any violation of the provisions of the Legal Metrology Act, 2009 and the Legal Metrology (Packaged Commodities) Rules, 2011. Thus, no proceedings should be initiated against them.

    6. The respondent has also issued similar com-munications to the manufacturer, who accepting its mis-take has pleaded guilty before the respondent vide letter dated 07.08.2012 and was agreed to pay the fine im-posed by the respondent. Accordingly, the respondent vide its order dated 10.04.2013 imposed a fine of Rs. 5,000/- on the aforesaid manufacturing company and has subsequently arrived at a settlement with the afore-said manufacturing company. Once the said offence had been compounded against the manufacturer, the pro-ceedings ought to have been dropped. However, the re-spondent has initiated criminal proceedings against the petitioners No. 2 and 3, alleging violation of Section 18(1) read with Section 36(1) of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2011. On the basis of the com-plaint, learned Judicial Magistrate First Class, Nagda, District Ujjain (MP) took cognizance of the offence, which is subject matter of challenge before this Court.

    7. Learned Senior Counsel for the petitioner/company that in the complaint, the nominee of the peti-tioner/company and its employees both have been ar-rayed as accused persons. ITC Limited is one company and Choupal Sagar is only a retail shop of the Company. It is not a separate legal entity. The license for the shop is also in the name of the company. Thus, the company itself through its nominee could have been arrayed as an accused and thus, prosecution against petitioners No. 2 and 3 is bad in law.

    8. It is further submitted that the learned Judicial Magistrate First Class, Nagda, District Ujjain (MP) has failed to consider that the complaint is barred by limita-tion, because the complaint relates to the offence re-ferred to in Section 34(2) of the Legal Metrology Act, 2009, however, the complaint is made under Section 38(1) of the Legal Metrology Act, 2009 and both the sec-tions provide only fine for the alleged offence. Thus, the limitation as prescribed under Section 468 of the Code of Criminal Procedure, 1973 is of three months only. In the present case, alleged inspection was made on 16.07.2012 and the limitation for filing complaint was till 16.10.2012, whereas the complaint has been filed on 20.05.2013. Thus, the complaint is barred by more than ten months. Under these circumstances, the complaint, in fact, amounts an abuse of process of law as against the petitioners. Therefore, learned Senior Counsel for the petitioners prays for quashment of proceedings in Crimi-nal Case No. 381/2013 pending before the Judicial Magis-trate First Class, Nagda, District Ujjain (MP) and order dated 20.05.2013, whereby cognizance has been taken against the petitioners for offence punishable under Sec-tion 18 of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2016.

    9. On the other hand, learned Public Prosecutor for the respondent/State of Madhya Pradesh has sub-mitted that the contents of the complaint discloses com-mission of offence punishable under Section 18 of the Le-gal Metrology Act, 2009 read with Rule 11(2) of the Le-gal Metrology (Packaged Commodities) Rules, 2016; and there is no error committed by the Judicial Magistrate First Class, Nagda, District Ujjain (MP) in taking cog-nizance against the petitioners for said offence. There-fore, the respondent/State of Madhya Pradesh seeks dismissal of the present petition, being devoid of merits.

    10. I have considered the rival contentions of the learned counsel for the parties and perused the record/documents filed along with the instant petition.

    11. From perusal of the complaint filed by Depart-ment of Legal Metrology, Weights & Measurement In-spector (Mr. P.S. Barapatra), Badnagar, District Ujjain (MP), it appears that on 16.07.2012 he visited Choupal Sagar situated at Ingoria Road, Nagda, District Ujjain (MP) and took two sealed packages of “Gagan Toor Dal”, 5 Kilograms (when packed), Batch No. 102, packed on 27.06.2012, MRP Rs. 500.00/- letha 82 Packed on 07.05.2012 MRP Rs. 400.00/- manufactured by Padam International, 23, Mangal Udyog Nagar, Indore (MP). On inspection, he found that a declaration was men-tioned in the packet with regard to net weight and also use of words “when packed”, which is in violation of Rule 11(2)(3) of the Legal Metrology (Packaged Commodi-ties) Rules, 2016 and punishable under Section 18(1) read with Section 36(1) of the Legal Metrology Act, 2009.

    12. Rule 11 of the Legal Metrology (Packaged Com-modities) Rules, 2011 provides, as under:—

    “11. General provisions relating to declaration of quantity.—

    (1) In declaring the net quantity of the commodity con-tained in a package, the weight of wrappers and materi-als other than the commodity shall be excluded.

    (2) Where a commodity in a package is not likely to un-dergo any variation in weight or measure, on account of the environmental conditions, the quantity declared on the package shall correspond to the net quantity which will be received by the consumer, and the declaration of quantity of the commodity as declared on the package, and the declaration of quantity on such package shall not be qualified by the words ‘when packed’ or the like.

    (3) Save as otherwise provided in sub-rule (4), where a commodity in package is likely to undergo variations in weight or measure on account of environmental condi-tions and such variation is negligible, the declaration of quantity in relation to such package shall be made after taking into account such variation so that the consumer may receive not less than the net quantity of the com-modity as declared on the package, and the declaration of quantity on such package shall not also be qualified by the words ‘when packed’ or the like.

    (4) The declaration of quantity in relation to commodi-ties which are likely to undergo significant variations in weight or measures on account of environmental or other conditions may be qualified by the words “when packed”, as specified in the Third Schedule.”

    13. As per the requirement of the said provision, the declaration is required on the net quantity of the commodity contained in a package. In the present case, package of ‘Toor Dal’ purchased by the Legal Metrology Inspector, the net weight of the commodity ‘Toor Dal’ is specifically mentioned as 5 Kilograms (when packed), however, in the declaration, additional word “when packed” was also referred. However, there is nothing in the Legal Metrology (Packaged Commodities) Rules, 2011 as amended by (Amendment) Rules, 2016 that ad-ditional words used in the declaration will be in violation of Section 18 of the Legal Metrology Act, 2009.

    14. Section 18 of the Legal Metrology Act, 2009 provides, as under:—

    “18. Declarations on pre-packaged commodi-ties.

    (1) No person shall manufacture, pack, sell, import, distribute, deliver, offer, expose or possess for sale any pre-packaged commodity unless such package is in such standard quantities or number and bears thereon such declarations and particulars in such manner as may be prescribed.

    (2) Any advertisement mentioning the retail sale price of a pre-packaged commodity shall contain a dec-laration as to the net quantity or number of the com-modity contained in the package in such form and man-ner as may be prescribed.”

    15. In the aforesaid section also, there is no provi-sion that additional words as mentioned in the commod-ity shall be punishable. It is also pertinent to mention here that the petitioner/company is not the manufac-turer or packer of the commodity. The petitioner - com-pany is the retail dealer.

    16. Rule 21 of the Legal Metrology (Packaged Commodities) Rules, 2011 provides, as under:—

    “21. Inspection of quantity and error in pack-ages at the premises of the wholesale dealer or retail dealer. -

    (1) Ordinarily, any test in relation to the net quantity contained in a package shall not be carried out at the premises of the retail dealer or the wholesale dealer, unless-

    (i) a complaint is received by the Director or the Con-troller or any Legal Metrology Officer to the effect that the package sold or delivered to the complainant does not contain the quantity declared on such pack-age or on the label affixed thereto;

    (ii) the Director or the Controller or any Legal Metrology Officer has reason to suspect that any package has been tampered with or that there has been any pilfer-age or leakage of the commodity contained in the packages

    (iii) the Director or the Controller or any Legal Metrology Officer and any package, or any label affixed thereto, does not bear thereon all or any of the declarations which are required to be made under these rules.

    (2) Where any test is carried out in pursuance of the provisions of sub-rule (1), the Director, Controller or any Legal Metrology Officer shall verify whether the quantity contained in the package corresponds to the quantity declared on such packages or any label affixed thereto and where quantity contained in package is less than the declared quantity, whether the deficiency is more than the maximum permissible error in relation to that commodity.

    (3) Where the Director, Controller or any Legal Metrol-ogy Officer finds on a test carried out under this rule that the error in deficiency in any package kept or stored for sale, distribution or delivery at the premises of the retail or wholesale dealer is more than the maxi-mum permissible error in relation to that commodity, he shall seize such package and take appropriate action against the retail dealer or the wholesale dealer, as the case may be, in accordance with the provisions of the Act:

    Provided that where the package bears the legend ‘when packed’, no punitive action shall be taken against the retail dealer or wholesale dealer if the Director, Controller or any Legal Metrology Officer is satisfied af-ter necessary test that the deficiency in the net quantity contained in package is due to environmental condi-tions.

    (4) Where as a result of any test made under this rule, it is found that the net quantity contained in the package conforms to the declared quantity or where there is a deficiency, such deficiency is not more than the maxi-mum permissible error, the retail dealer shall be at lib-erty to sell or deliver or distribute such commodity at the price determined on the basis of the quantity found on such tests.

    (5) Where, as a result of any test made under this rule, it is found that any package, or any label affixed thereto, does not bear thereon all or any of the declarations re-quired to be made under these rules, it shall be lawful for the Director, Controller or any Legal Metrology Offi-cer to make such enquiries as to the source from which such package was received by the whole sale dealer or the retail dealer as the case may be, as he may think fit.” 17. In the present case, the said product was man-ufactured by Padam International, 23, Mangal Udyog Nagar, Indore (MP). The petitioner - company pur-chased the said package from M/s. Jain Traders, 40/3, Kalani Mohalla, Indore (MP). There is no allegation that the petitioner/company has meddled or tampered with the declaration made on the label. Thus, in case of any default, the same is attributable to the manufacturer/packer and not against the petitioner/company. There-fore, inspection in relation to net quantity contained in the package should be carried out at the premises of the product and not in the retail dealer. The manufacturer/packer had already accepted its mistake and the offence against it had already been compounded. Under these circumstances, there was no reason for initiation of the proceedings against the petitioners.

    17. The violation of Rule 11(2)(3) and (4) of the Legal Metrology (Packed Commodities) Rules, 2011 as amended by (Amendment) Rules, 2016 read with Section 18 of the Legal Metrology Act, 2009 is punishable under Section 34 of the of the Legal Metrology Act, 2009, which is punishable with fine which shall not be less than two thousand rupees but which may extend to five thousand rupees and, for the second or subsequent offence, with imprisonment for a term which shall not be less than three months but which may extend to one year, or with fine, or with both.

    18. In the present case, the inspection was carried out on 16.07.2012 and necessary information were sought from the petitioner - company on 13.08.2012 and 03.10.2012. However, the complaint was filed before the Judicial Magistrate First Class, Nagda, District Ujjain (MP) on 20.05.2013, after ten months of the date of al-leged incident.

    19. Section 468 of the Code of Criminal Procedure, 1973 provides that except as otherwise provided else-where in this Code, no Court shall take cognizance of an offence of the category specified in sub-section (2), after the expiry of the period of limitation. The period of limi-tation shall be six months, if the offence is punishable with fine only. Thus, it is clear that the complaint has been filed after a period of limitation, which is prescribed as six months and Section 469(1) of the Code of Criminal Procedure, 1973 clearly creates a bar for taking cog-nizance of the offence after lapse of period of limitation. Section 473 of the Code gives a very wide power to the Court for taking cognizance even after the expiry of pe-riod of limitation provided that the Court is satisfied on the facts and in the circumstances of the case, that the delay has been properly explained or that it is necessary so to do in the interests of justice. This power has been conferred on the Courts notwithstanding anything con-tained in the foregoing provisions of Chapter XXXVI in which Sections 467, 468 and 469 also appear. But, in the present case, the respondent/State of Madhya Pradesh has not filed any application for condonation of delay in filing the complaint. A reading of the aforementioned sections thus makes it very clear that the Court cannot take cognizance of an offence of the categories of cases specified in Sub-section (2) of Section 468 after the lapse of the period of limitation mentioned therein.

    20. The date of alleged offence is 16.07.2012 and the trial Court has taken the cognizance of the offence on 20.05.2013, without satisfying itself about the delay, and therefore, the trial Court has committed an error in tak-ing cognizance against the petitioners, after the period of limitation.

    21. For the reasons stated above, Miscellaneous Criminal Case No. 714/2014 succeeds and order dated 20.05.2013 passed in Criminal Case No. 381/2013 by the Judicial Magistrate First Class, Nagda, District Ujjain (MP) is hereby quashed; and all the consequential pro-ceeding arising out of Crime No. 34/2012-13 registered at Department of Legal Metrology, Weights & Measure-ment Inspector (Mr. P.S. Barapatra), Badnagar, District Ujjain (MP) against the petitioners for offence punish-able under Section 18 of the Legal Metrology Act, 2009 read with Rule 11(2) of the Legal Metrology (Packaged Commodities) Rules, 2016 is hereby quashed.

    Use AI to get other relevant cases.

    Comments

    Itc Limited v. State Of Madhya Pradesh
    (Apr 4, 2019)