Utah Admin. Code 315-266-607 : Environmental Quality — Waste Management and Radiation Control, Waste Management —266 - Standards for the Management of Specific Hazardous Wastes and Specific Types of Hazardous Waste Management Facilities —266-607 - Appendix VIII to Rule R315-266 - Organic Compounds for Which Residues Shall Be Analyzed TEXT PDF Table Volatiles Benzene Toluene Carbon tetrachloride Chloroform Methylene chloride Trichloroethylene Tetra chloroethylene 1,1,1-Trichloroethane Chlorobenzene cis-1,4-Dichloro-2 -butene Bromochloromethane Bromodichloromethane Bromoform Bromomethane Methylene bromide Methyl ethyl ketone Semivolatiles Bis(2-ethylhexyl)phthalate Naphthalene Phenol Diethyl phthalate Butyl benzyl phthalate 2,4-Dimethylphenol o-Dichlorobenzene m-Dichlorobenzene p-Dichlorobenzene Hexachlorobenzene 2,4,6-Trichlorophenol Fluoranthene o-Nitrophenol 1,2,4-Trichlorobenzene o-Chlorophenol Pentachlorophenol Pyrene Dimethyl phthalate Mononitrobenzene 2,6-Toluene diisocyanate Polychlorinated dibenzo-p-dioxins(1) Polychlorinated dibenzo-furans(1) (1) Analyses for polychlorinated dibenzo-p-dioxins and polychlorinated dibenzo-furans are required only for residues collected from areas downstream of the combustion chamber, e.g., ductwork, boiler tubes, heat exchange surfaces, air pollution control devices, etc. Note to Appendix VIII: Analysis is not required for those compounds that do not have an established F039 nonwastewater concentration limit. Utah Admin. Code R315-266-607 Adopted by Utah State Bulletin Number 2020-19, effective 9/14/2020