Translate
Text Highlighter

Bookmark

PDF

Share

Report a problem
AMICUS AI
Citation Codes
Equivalent Citations
citation codes
Attorney(S)
Judges
Are you a practicing lawyer?
Enhance your digital presence and reach by creating a Casemine profile.
Upload pleading to use the new AI search
Cites
Cited by
Citation Codes
Equivalent Citations
citation codes
Attorney(S)
Judges

A Fulton Company Ltd. v. Grant Barnett & Company Ltd.

Smart Summary

Factual and Procedural Background

The Plaintiff claims entitlement under Part III of the Act to design right protection in two features of a range of compact ladies' folding umbrellas marketed by it. These umbrellas have six spokes and fold into a flat, roughly rectangular shape, unlike the typical cylindrical folding umbrellas. The Plaintiff markets these umbrellas under the names "Miniflat" and "Flat Compact," claiming design rights in the handle (especially of the Flat Compact) and the case. The Defendant imported and marketed a similar umbrella called the "6F Ultra Compact," which the Plaintiff alleges infringes its design rights. The Plaintiff seeks various forms of relief as a consequence.

The Plaintiff and Defendant are two of the principal umbrella suppliers in the United Kingdom market. The Plaintiff was established in 1955 and has been involved closely in the design process of its umbrellas, working with manufacturers in China and Taiwan. The Defendant was formed as a merger of two umbrella manufacturers and typically orders existing designs from Far Eastern manufacturers without extensive design involvement.

The dispute arose after the Plaintiff identified the Defendant's 6F Ultra Compact umbrella as similar to its own products, leading to correspondence and ultimately this legal action. The Plaintiff claims design rights subsist in the handle and case designs, that it owns those rights, and that the Defendant's importation and marketing infringe those rights. The court was tasked to determine these issues and the appropriate relief.

Legal Issues Presented

  1. Do design rights subsist in the designs of the handle and the case of the Plaintiff's umbrellas?
  2. Is the Plaintiff the owner of those design rights?
  3. Did the Defendant's importation and marketing of the 6F Ultra Compact infringe the Plaintiff's design rights?
  4. What forms of relief is the Plaintiff entitled to as a result of any infringement?

Arguments of the Parties

Plaintiff's Arguments

  • The designs of the Flat Compact handle and the Miniflat case are original and not commonplace in the relevant design field.
  • The Plaintiff, through its employee and director Mr Fulton, created the designs in the course of employment, making the Plaintiff the owner of the design rights.
  • The Defendant's imported 6F Ultra Compact umbrella's handle and case are substantially similar to and copied from the Plaintiff's designs, constituting infringement.
  • The Defendant had reason to believe the case infringed the Plaintiff's registered design and later had reason to believe the handle infringed the design right, entitling the Plaintiff to relief for secondary infringement.
  • The Plaintiff does not accept that the Defendant instigated the copying but contends the Defendant is liable for secondary infringement by importing the copied articles.

Defendant's Arguments

  • The Defendant denies ownership of the design rights by the Plaintiff, arguing that the specialist manufacturers (Everwise for handles and Szu Mao for cases) were the true designers.
  • The Defendant asserts that the designs are commonplace in the relevant field and therefore not entitled to protection under the Act.
  • The Defendant challenges the Plaintiff's claim that the handle and case designs are original and not dictated by functional requirements or "must fit" and "must match" exclusions under the Act.
  • The Defendant denies knowledge or reason to believe that the imported umbrellas infringed the Plaintiff's design rights.
  • The Defendant contends that the similarities arise from natural design constraints and not from copying.

Table of Precedents Cited

Precedent Rule or Principle Cited For Application by the Court
Farmers Build Ltd v Carier Bulk Materials Handling Ltd [1999] RPC 461 Interpretation of "commonplace" in design right law; exclusion of commonplace designs under section 213(4). The court relied on this case for guidance on the narrow construction of "commonplace" and applied its principles to find the Plaintiff's designs were not commonplace.
C&H Engineering v F. Klucznik & Sons Ltd [1992] FSR 421 Meaning of "original" in design right, analogous to copyright law. The court adopted the copyright meaning of originality to conclude the Plaintiff's designs originated with its designer.
Scholes Windows Ltd v Magnet Ltd [2000] FSR 432 Significance of small design differences in determining whether a design is commonplace. The court agreed with the principle that small but deliberate design variations can render a design non-commonplace.
Mark Wilkinson Furniture Ltd v Woodcraft Design (Radcliffe) Ltd [1998] FSR 63 Whether three-dimensional features are surface decoration excluded from design right. The court held that protruding seams on the case were part of the shape/configuration and not merely surface decoration.
British Leyland Motor Corporation Ltd v Armstrong Patents Co Ltd [1986] AC 577 Interpretation of the "must fit" exclusion under section 213(3)(b)(i). The court applied a purposive construction of the exclusion, limiting it to spare parts and not extending it to the Plaintiff's umbrella case.
Baby Dan AS v Brevi srl [1999] FSR 377 Purposive construction of the "must fit" exclusion to deny protection to spare parts. The court followed this reasoning to reject the Defendant's "must fit" argument regarding the umbrella case.
Ibcos Computers Ltd v Barclays Finance Ltd [1994] FSR 275 Inference of copying from similarity and opportunity; shifting burden to defendant to prove non-copying. The court applied this principle to infer copying of the Plaintiff's designs by the Defendant's manufacturers.
LA Gear Inc v Hi-Tech Sports plc [1992] FSR 121 Meaning of "reason to believe" in secondary infringement context. The court used this precedent to determine when the Defendant had reason to believe it was infringing the Plaintiff's design rights.
Monsoon Ltd v India Imports of Rhode Island Ltd [1993] FSR 486 Communications such as solicitors' letters can give a defendant reason to believe they infringe design rights. The court referenced this case to assess the timing of the Defendant's reason to believe infringement.
ZYX Music GmbH v King [1997] CMLR 318 Effect of communications on establishing reason to believe in infringement cases. Used to support the court's approach to the Defendant's knowledge and reason to believe.
Roban Jig & Tool Co Ltd v Taylor [1979] FSR 130 Whether relief can be claimed for infringements arising after the issue of proceedings. The court found this case less helpful due to extreme facts but considered it in relation to relief for post-issue infringements.
Arrowin Ltd v Trimguard (UK) Ltd [1984] RPC 581 Amendment of pleadings to cover causes of action arising after writ issuance. The court preferred the approach allowing relief for infringements arising after commencement of proceedings.
Vax Appliances Ltd v Hoover PLC [1990] RPC 656 Allowance of amendments to pleadings for new causes of action and convenience in litigation. The court followed this approach to allow relief for infringements arising post-writ.

Court's Reasoning and Analysis

The court began by defining the scope of design right under the Act, noting that it subsists in original designs of shape or configuration of whole or parts of articles, excluding methods of construction, commonplace designs, and surface decoration. The court examined whether the Plaintiff's designs for the Flat Compact handle and Miniflat case met these criteria.

It was found that both the handle and case were consciously designed by Mr Fulton, the Plaintiff's director and employee, thereby satisfying the creation and originality requirements. The court rejected the Defendant's argument that the designs were commonplace, holding that while some general features (e.g. roughly rectangular handle for a flat umbrella) might be expected, the specific detailed shapes and configurations were not commonplace. The court gave weight to subtle but deliberate design features such as slopes, domed tops, rounded corners on the handle, and the box-like shape and seam placements on the case.

The court also rejected the Defendant's arguments based on statutory exclusions. The "method or principle of construction" exclusion did not apply because the design right protects the shape/configuration produced by the method, not the method itself. The "must fit" and "must match" exclusions were narrowly construed to exclude only features designed specifically to enable connection or matching with other articles, which was not the case here. The seams on the case were held to be part of the shape/configuration, not mere surface decoration.

Regarding ownership, the court held that Mr Fulton was an employee of the Plaintiff company despite lack of a written contract, and having created the designs in the course of employment, the Plaintiff owned the design rights.

On infringement, the court analyzed whether the Defendant's imported umbrellas were made substantially to the Plaintiff's designs and whether copying occurred. It found substantial similarity between the handles and cases, with minor differences insufficient to avoid infringement. While the Defendant did not itself copy or instigate copying, the court inferred on balance of probabilities that the manufacturers supplying the Defendant had copied the Plaintiff's designs.

The court considered whether the Defendant had knowledge or reason to believe the articles infringed design rights. It found no actual knowledge but concluded that the Defendant had reason to believe the case infringed design rights from the time it was informed of the Plaintiff's registered design and made modifications accordingly. As for the handle, the Defendant acquired reason to believe infringement only after the Plaintiff served a substituted statement of claim with precise allegations. The court allowed a reasonable period for investigation, fixing the date from which secondary infringement liability attached.

Finally, the court addressed the possibility of claiming relief for infringements occurring after the original writ was issued. It found no legal obstacle to claiming relief in the current action for such infringements, preferring a practical approach to avoid unnecessary new proceedings.

Holding and Implications

HOLDING: The court held that design rights subsist in the Plaintiff's Flat Compact handle and Miniflat case designs, that the Plaintiff owns those rights, and that the Defendant's importation and marketing of the 6F Ultra Compact umbrella infringed those design rights. The infringement as to the case occurred from the first importation, and as to the handle from a later date when the Defendant had reason to believe infringement was occurring.

IMPLICATIONS: The decision confirms that unregistered design rights protect original designs of shape and configuration, including functional articles without aesthetic appeal, provided they are not commonplace or excluded by statutory provisions. It clarifies ownership principles for design rights created by company directors/employees without written contracts. The ruling affirms that secondary infringement liability can arise from importing articles copied by third-party manufacturers, even absent direct copying by the importer. The court did not award additional damages for flagrant infringement, indicating a measured approach to remedies.

No new precedent was set beyond the application of existing statutory provisions and case law to the facts of this case. The ruling primarily affects the parties by upholding the Plaintiff's design rights and granting entitlement to relief for infringement.

To access the original judgment, please Sign In or Subscribe.

A Fulton Company Ltd. v Grant Barnett & Company Ltd.

Contains public sector information licensed under the Open Justice Licence v1.0.

Use AI to get other relevant cases.

Comments

A Fulton Company Ltd. v Grant Barnett & Company Ltd.
(Oct 5, 2000)