(2) Every power-driven saw, other than a portable saw, shall be equipped with a guard which covers the saw blade to such an extent as will prevent contact with the teeth. In operation, such guard shall rise automatically by pressure from the material being cut or shall be so adjusted that as the saw cuts the material, the distance from the material to the underside of the guard does not exceed one-half inch. The exposed teeth of the saw blade beneath the table shall be effectively guarded. Every such saw shall be provided with a cut-off switch within easy reach of the operator without his leaving the operating position.
Exception:Any arm saw whose upper blade half is enclosed and which is provided with a front blocking bar or rod is not required to be guarded by the automatic rising pressure guard.