Login

7 Del. Admin. Code § 1351-A-3.0 : Natural Resources and Environmental Control —Division of Waste and Hazardous Substances —Tank Management Section —Underground Storage Tank Systems — General Requirements For Underground Storage Tank Systems —A-3.0 - Referenced Standards

3.1 Referenced Standards Organizations
3.1.1 The referenced standards listed in this Section have served in part as the basis for the standards enacted under these Regulations. The most recent editions of the referenced standards are available for review and inspection with prior notification at the Department of Natural Resources and Environmental Control, Tank Management Branch and from the following sources (addresses of the cited organizations are subject to change):
3.1.2 American Petroleum Institute (API), 1220 L Street, N.W., Washington, D.C. 20005, (202) 682-8375. http://www.api.org
3.1.3 ASTM International, 100 Barr Harbor Drive, West Conshohocken, Pennsylvania 19429-2959, (610) 832-9585. http://www.astm.org
3.1.4 National Association of Corrosion Engineers (NACE), P. O. Box 218340, Houston, Texas 77218, (713) 492-0535. http://www.nace.org
3.1.5 National Fire Protection Association (NFPA), Batterymarch Park, Quincy, MA 02269, (800) 344-3555. http://www.nfpa.org
3.1.6 National Leak Prevention Association (NLPA), 75-4 Main Street, Suite 300, Plymouth, NH 03264, (815) 301-2785. http://www.nlpa-online.org/index.html
3.1.7 Petroleum Equipment Institute (PEI), P. O. Box 2380, Tulsa, OK 74101, (918) 494-9696. http://www.pei.org
3.1.8 Steel Tank Institute (STI), 570 Oakwood Road, Lake Zurich, Illinois 60047, (847) 438-8265. http://www.steeltank.com
3.1.9 Underwriters Laboratories (UL), 333 Pfingsten Road, Northbrook, Illinois 60062, (847) 272-8800. http://www.ul.com
3.1.10 U.S. Department of Labor, Occupational Safety and Health Administration, (OSHA), Frances Perkins Building, 200 Constitution Avenue, NW, Washington, DC 20210, (866)-487-2365. http://www.osha.gov
3.2 Applicability
3.2.1 In these Regulations, all referenced standards mean the most recent edition or version in effect on January 11, 2008. Where there is an irreconcilable conflict between a standard or recommendation published by an industry or professional organization and referenced by these Regulations, and a requirement in these Regulations, the most stringent shall apply and control. Where there is an irreconcilable conflict between standards or recommendations published by industry or professional organizations and referenced by these Regulations, the most stringent shall apply and control.
3.3 Titles of Documents
3.3.1 American Petroleum Institute (API)
3.3.1.1 Specification Number 12F, Shop Welded Tanks for Storage of Production Liquids
3.3.1.2 RP 1604, Closure of Underground Petroleum Storage Tanks
3.3.1.3 RP 1615, Installation of Underground Petroleum Storage Systems
3.3.1.4 RP 1621, Bulk Liquid Stock Control at Retail Outlets
3.3.1.5 RP 1631, Interior Lining and Periodic Inspection of Underground Storage Tanks
3.3.1.6 RP 1632, Cathodic Protection of Underground Petroleum Storage Tanks
3.3.1.7 RP 1635, Management of Underground Petroleum Storage Systems at Marketing and Distribution Facilities [final edition, now out of print]
3.3.1.8 RP 1637, Using the API Color-Symbol System to Mark Equipment and Vehicles for Product Identification at Service Stations and Distribution Terminals
3.3.1.9 RP 1646, Safe Work Practices for Contractors Working at Retail Petroleum/Convenience Facilities
3.3.1.10 IP 1542, Identification Markings for Dedicated Aviation Fuel Manufacturing and Distribution Facilities, Airport Storage and Mobile Fueling Equipment
3.3.1.11 RP 1626, Storing and Handling Ethanol and Gasoline-ethanol Blends at Distribution Terminals and Service Stations
3.3.1.12 Standard 2015, Safe Entry and Cleaning of Petroleum Storage Tanks
3.3.1.13 RP 2016, Guidelines and Procedures for Entering and Cleaning Petroleum Storage Tanks
3.3.2 National Association of Corrosion Engineers (NACE)
3.3.2.1 RP 0285, Corrosion Control of Underground Storage Tank Systems by Cathodic Protection
3.3.2.2 TM0101, Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Tank Systems
3.3.2.3 RP 0169, Control of External Corrosion on Underground or Submerged Metallic Piping Systems
3.3.3 National Fire Protection Association (NFPA)
3.3.3.1 NFPA 30, Flammable and Combustible Liquids Code
3.3.3.2 NFPA 30A, Motor Fuel Dispensing Facilities and Repair Garages
3.3.3.3 NFPA 31, Standard for the Installation of Oil Burning Equipment
3.3.3.4 NFPA 329, Recommended Practice for Handling Releases of Flammable and Combustible Liquids and Gases
3.3.3.5 NFPA 385, Standard for Tank Vehicles for Flammable and Combustible Liquids
3.3.4 National Leak Prevention Association (NLPA)
3.3.4.1 NLPA Standard 631, Chapter A, Entry, Cleaning, Interior Inspection, Repair, and Lining of Underground Storage Tanks and Chapter B, Future Internal Inspection Requirements for Lined Tanks
3.3.5 Petroleum Equipment Institute (PEI)
3.3.5.1 RP100, Recommended Practices for Installation of Underground Liquid Storage Systems
3.3.5.2 RP300, Recommended Practices for Installation and Testing of Vapor Recovery Systems at Vehicle Fueling Sites
3.3.6 Steel Tank Institute (STI)
3.3.6.1 STI P3, Specification for sti P3® System for External Corrosion Protection of Underground Steel Storage Tanks
3.3.6.2 F-841, Standard for Dual Wall Underground Steel Storage Tanks
3.3.6.3 F-894, ACT-100® Specification for External Corrosion Protection of FRP Composite Steel Underground Storage Tanks
3.3.6.4 F-961, ACT-100U® Specification for External Corrosion Protection of Composite Steel Underground Storage Tanks
3.3.6.5 R-972, Recommended Practice for the Addition of Supplemental Anodes to sti-P3® USTs
3.3.6.6 F-922, Specification for Permatank®
3.3.7 Underwriters Laboratories Standards (UL)
3.3.7.1 UL 58, Standard for Steel Underground Tanks for Flammable and Combustible Liquids
3.3.7.2 UL 1316, Standard for Glass-Fiber Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols and Alcohol Gasoline Mixtures
3.3.7.3 UL 1746, Standard for Safety: External Corrosion Protection Systems For Steel Underground Storage Tanks
3.3.7.4 UL 971, Standard for Nonmetallic Underground Piping for Flammable Liquids
3.3.7.5 UL 567, Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas
3.3.8 U.S. Department of Labor, Occupational Safety and Health Administration (OSHA)
3.3.8.1 OSHA, 29 CFR, 1910.146, Permit Required Confined Spaces
3.3.8.2 OSHA, 29 CFR, 1926 Subpart P, Excavations

7 Del. Admin. Code § 1351-A-3.0

11 DE Reg. 922 (01/01/08)